Garmin Airmar P79 In-Hull Transducer

This entry level in-hull transducer with an adjustable deadrise angle makes installation a snap.

The 8-pin 600 W transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 22 degree deadrise.

Transducer kit comes with installation instructions¹. Follow the instructions carefully to avoid damaging your boat.

¹Fiberglass should be no more than 5/8" thick. Not recommended for cored hulls.

When using with a 6-pin Garmin sounder, transducer adapter cable part number 010-11612-00 is required.

Specifications

• Type: Adjustable In-Hull Depth-Only Transducer
• Frequency: Dual-frequency – 50 kHz / 200 kHz
• Power Rating: 600 W RMS
• Beamwidth: 45° @ 50 kHz | 12° @ 200 kHz
• Maximum Depth: Up to 1,000 ft (305 m) @ 50 kHz - Up to 600 ft (183 m) @ 200 kHz
• Mounting: Drill-free in-hull installation (for solid fiberglass hulls only)
• Cable Length: 25 ft (7.6 m)
• Connector: 8-pin Garmin connector
• Recommended Boat Size: Up to 26 ft (8 m)
• Weight: Approximately 5 lb (2.3 kg)