Garmin GC 200 Marine IP Camera

Keep an eye on important areas of your boat with the Garmin GC 200 marine IP camera. It delivers live video to a compatible Garmin chartplotter, making it useful for monitoring the cockpit, aft deck, engine room or other areas above and below deck.

The camera connects through the Garmin Marine Network, so its video can be shared across compatible chartplotters. A network can support up to 16 cameras, with feeds from up to four cameras displayed at once on a single compatible chartplotter. On supported chartplotters, the reverse-image option provides a more intuitive view when manoeuvring astern.

Clear Views in Low Light

The GC 200 features a 2-megapixel Sony STARVIS CMOS image sensor and built-in infrared LEDs. Its wide field of view covers approximately 99° horizontally and 74° vertically, while infrared night vision reaches up to 30 metres.

The camera captures video at up to 1920 × 1080 pixels. Video resolution displayed on a Garmin chartplotter depends on the connected model and is supported at up to 1280 × 720 pixels.

Flexible Marine Installation

The compact camera can be mounted in a range of positions, with the image rotated 180° to suit the installation. Its IPX7-rated housing and operating temperature range of -20°C to 60°C make it suitable for a variety of marine locations.

Key Features

• Live video on compatible Garmin chartplotters
• Garmin Marine Network connectivity for sharing video between displays
• Connect up to 16 cameras to the network
• Display up to four camera feeds at once on a compatible chartplotter
• 2-megapixel Sony STARVIS CMOS image sensor
• Built-in infrared LEDs with night vision up to 30 metres
• Wide 99° horizontal and 74° vertical viewing angles
• Standard and reversed image options, plus 180° image rotation
• Compact, IPX7-rated housing

Technical Specifications

What's in the Box?

• Garmin GC 200 marine IP camera
• 6 m Garmin Marine Network cable with small connector
• Garmin Marine Network adapter cable, small connector to large connector
• Mounting hardware
• Documentation

Compatibility and Installation

A compatible Garmin chartplotter and Garmin Marine Network connection are required. The Garmin Power and Audio Module (010-12527-00) is sold separately. For a 24 V DC system, use the appropriate Garmin power module; do not connect the camera directly to a 24 V DC supply. Check the installation requirements for your chartplotter and network before ordering.