Harken Small Boat Low-Load Furling System 434 - 3mm Luff Wire

Harken Small Boat Furling Systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. An optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without removing the headstay. Swivels are independent of the headstay, allowing you to tension the luff separately from the mast rake.

Specifications

• Maximum luff wire diameter: 1/8" (3 mm)
• Clevis pin diameter: 1/4" (6.4 mm)
• Maximum working load: 500 lb (227 kg)
• Includes upper swivel: 162
• Includes drum: 163
• Boat length - monohull: Under 4.9 m (Under 16 ft)
• Pin-to-pin length: 2 1/2" (64 mm)
• Drum diameter: 2 7/8" (73 mm)
• Maximum line diameter: 5/32" (4 mm)
• Jaw width: 5/16" (8 mm)
• Weight: 7.6 oz. (215 g)

Note: Includes drum and upper swivel. Does not include hoistable swivel.

Technical File

Installation Sheet