Frequently bought together:
Description
Halyard restrainers prevent the halyard from wrapping around the foil on boats where the swivel isn’t mounted near the masthead.
Specifications
- Sheave diameter: 15/16" (25 mm)
- Fasteners: 5 RH mm (#10 RH inch)
- Use with furling unit: 00AL, 0, 1, 1.5
- Use with: 00AL/0/1
- Weight: 3 oz. (85 g)
Technical File
Related Products
Optiparts Optimist Halyard Block with Hook for Harken
Optiparts
€55.95
The Optimist Halyard Block with an official Harken plain bearing block and hook as seen under Optiparts Sailing Spars online. Harken Ball bearing hook-in block as used on Blackgold racing masts. Due...
OPEX1351H
Harken Captive Halyard Shackle 2107 - 5mm
Harken
€19.95
Forged stainless steel shackles are polished to a high luster and stamped with the screw pin diameter.
These shackles have a secondary pin to keep the shackle permanently secured to the halyard and...
HK2107
Optiparts Optimist Halyard with Hook-in Block for Silver Mast
Optiparts
€47.95
The Optimist Halyard line with Optipart hook-in plain bearing Optimist halyard as used on the Silver spars from Optiparts. The hook-in block has a round fiberglass filled nylon case designed to fit...
OPEX1342
Harken Through-Deck Wire Block 302 - 25mm
Harken
€81.95
Lightweight, low-friction wire blocks carry wire halyards and high-strength control lines on boats of all sizes. Specifications Sheave diameter: 1" (25 mm) Maximum wire diameter: 3/32" (2 mm)...
HK302
