Marine Steering Systems

The Seastar Capilano A200-11TMC is a heavy duty, bronze and stainless steel hydraulic steering cylinder with 11" stroke, 26 cu inch capacity and with clevis end. Features Heavy duty brass cylinder Suitable for single or dual rudder vessels Suitable for...

Teleflex Fitting Elbow 1/4Npt - 3/8 Tube.  

Dometic Seastar Hydraulic Helm Seal Kit. Each piece of this Seal kit is constructed from rubber & plastics for long-lasting and dependable service, heat resisting, corrosion, as well as rust wear. 

Dometic Seastar Tube Nut 3/8"- 6 Pack

Dometic Seastar Fitting Kit HF5502. 2ND station/Autopilot to inboard or Sterndrive application.  This kit is for us with systems plumed with 3/8" diameter nylon or copper tube only.

Teleflex Dometic outboard steering splashwell kit with 15° brackets Allows the steering cable to exit the splashwell without sacrificing splash protection  This cable connection is used for older model outboards without tilt tubes, low HP...

Teleflex Dometic outboard steering splashwell kit with 90° brackets Allows the steering cable to exit the splashwell without sacrificing splash protection  This cable connection is used for older model outboards without tilt tubes, low HP...

Trem adjustable outboard cable steering tie bar L5303351 - Suits most single outboard installations Specification 316 Stainless Length 380mm Rod dia. 11mm

Dometic Seastar HA4642 replaceable pivot plate for use with hydraulic cylinder HC4648H

Can be used with all BayStar helms, with appropriate fittings. Kit contains two cut lengths of tubing. 30’ kit (2 x 30’ lengths tubing): HT4430H

Dometic SeaStar HO50FT Hose kits are for use with the SeaStar or BayStar steering systems. Hoses are rated up to 1000 PSI and are 5/16" ID, 1/2" OD with 3/8 Compression Fittings. Seastar standard outboard hydraulic hoses can be used with all SeaStar...

Can be used with all BayStar helms, with appropriate fittings. Kit contains two cut lengths of tubing. 20’ kit (2 x 20’ lengths tubing): HT4420H

Dometic BayStar Outboard Compact, Front Mount, Steering Cylinder HC4658H (HC4658-3) This outboard cylinder is designed to be compact and balanced, fitting most splashwells and providing full engine movement. Suitable for up to 150hp Outboards (See...

Dometic BayStar Outboard Compact, Front Mount, Steering Cylinder HC4648H. This outboard cylinder is designed to be compact and balanced, fitting most splashwells and providing full engine movement. Suitable for up to 150hp Outboards (See suitability...

Dometic BayStar Outboard Compact, Front Mount, Steering Cylinder HC4645-3. This outboard cylinder is designed to be compact and balanced, fitting most splashwells and providing full engine movement. Suitable for up to 150hp Outboards (See suitability...

Dometic BayStar Inboard Cylinder Model  BA125-6.25 ATM. Built in the same tradition as SeaStar Inboard Steering, these BayStar Systems are designed for relatively low torque inboard applications, including inshore boats and other low speed...

BayStar hydraulic steering is manufactured by SeaStar® one of the most trusted name in pleasure boat steering. BayStar allows you to, cost effectively, install the safety, reliability and comfort of hydraulic steering onto your boat and combine it...

BayStar HC4647-3 ( Dometic 9130000530) Honda Outboard Compact Hydraulic Steering Cylinder Features HC4647-3 for Honda Outboard Engines 1998-2009 115-130HP Provides safe, reliable, and comfortable hydraulic steering Manufactured by SeaStar, the leader in...

The Lewmar 85006680 is fast-action, simple twist handgrip release for Lewmar Folding Steering Wheel Sold singularly - Two required per install 

The Lewmar Integra drive, Mamba version, mounts directly inside the Integra pedestal. This unique installation is only available from Lewmar and provides the installer with a simple and quick installation with no complicated, labour intensive mounting...