ILCA Laser Boats & Parts

Harken high performance XD Vang Kit with lines and Harken blocks to suits all rigs ILCA and Laser Sailboats. Includes high grade Harken vang key. The ILCA / Laser Harken Vang Assembly is a very popular ILCA dinghy upgrade. It features a 15:1 purchase,...

Designed for use on a Laser ILCA dinghy as a Vang block but equally at home on other dinghies. Strong, secure, simple and efficient. Loads are lead directly from sheaves to attachment point allowing for light side plates. Designed primarily for racing...

Holt Laser Replacement Aluminium Fairlead Boom & Deck (Pair) : HT.282ALU Holt arts are high quality replacements that perform the same function as the original part. They should not be confused with official parts bearing the Laser® registered...

Element 6, high-performance ILCA6 composite lower mast section including lower mast plug, kicker, and gooseneck fittings. These new ILCA masts are designed with the same bend and performance characteristics as the existing aluminum masts; they will not...

The 433 Dinghy Clew Hook is designed for lasers and other loose-footed dinghies. Installs permanently on the boom and allows you to instantly attach and adjust your sail in high wind and waves. Specification Weight: 0.65 oz. (18.4 g) Technical...

Pre-cut, high performance ILCA Laser traveller line in Marlow Dyneeme D12 - Suits all rigs, allows hard crank down on the traveller to bring the blocks close to deck eye Features Low friction Lightweight Low water absorption Superb low stretch for...

ILCA 7 approved Laser Main Sail - Class compliant for all ILCA events. This sail also suits the Laser Performance L1 standard rig. Optional Extras Sail Numbers - Uses 4 x 12" Red Sail Numbers - 8 x 12" Black Country Letters - 12" Black Mk2 batten Set -...

Ready to go ILCA mast strop for outhaul or downhaul spliced in Harken Fly Carbo Pulley and made with 3mm D12 Marlow Dyneema. Features Harken Fly Carbo Block Overall length 27cm Marlow 3mm D12 Dynema  Eye splice for round mast attachment

Ready to go ILCA mast strop for outhaul or downhaul spliced in Harken 29mm Carbo Pulley and made with 3mm D12 Marlow Dyneema. Features Harken 29mm Carbo Block Overal length 27cm Marlow 3mm D12 Dynema  Eye splice for round mast attachment

Ready to go ILCA downhaul mast strop with 4mm D12 Marlow Dyneema with spliced-in pulleys, 1 x Harken 29mm and 1 x Harken Fly Carbo Blocks Features 1 x Harken 29mm Carbo Block + 1 x Harken Fly Block Overall length: 70cm Marlow 4mm D12 Dynema  Eye...

Ready to go, ILCA Outhaul Mast Strop in 4mm D12 Marlow Dyneema and with 2 spliced-in Harken 29mm carbo pulleys Features 2 x Harken 29mm Carbo Blocks Overal length 33cm Marlow 4mm D12 Dynema  Eye splice for goose neck attachment

New composite Ronstan ILCA Lower Vang unit giving exceptional control and easy adjustment, and now being preferred by some of the world's leading ILCA professionals. Features Lowest friction ILCA® vang unit available HHL sheave for the high load...

Standard Nylon Washer for the Laser-branded sailing trolleys.

The Laser Trolley Stacker is a galvanized support that fits onto the side of your Laser trolley and allows you to carry two or more boats at the same time. Features Water-resistant galvanized steel Fits all Laser Standard Sailing Dinghy trollies

The Laser Pico Trolley Stacker is a galvanized support that fits onto the side of your Laser trolley and allows you to carry two or more boats at the same time. Features Water-resistant galvanized steel Fits all Laser Pico Sailing Dinghy trollies

The Laser Bahia Trolley Stacker is a galvanized support that fits onto the side of your Laser trolley and allows you to carry two or more boats at the same time. Features Water-resistant galvanized steel Fits all Laser Bahia Sailing Dinghy trollies

Top mast Plug to suit ILCA Composite upper Mast

This ILCA Composite Top Mast Bottom Plug is a precision-fitting component designed specifically for the composite upper mast section on ILCA / Laser-style rigs. It seals the base of the composite top section, ensuring a tight fit with the lower mast...

The ILCA Cunningham / Outhaul Kit – Harken Upgrade is a full race-spec rigging kit designed to bring your one-design ILCA dinghy up to high-performance standard. Featuring premium hardware from Harken, this kit includes deck-mounted cam cleats,...

The Holt Rudder Mega Bolt Assembly (HT7015) is a robust stainless-steel lower rudder bolt set designed for dinghies (such as the Laser/ILCA class) where a durable, corrosion-resistant rudder pin is required. The assembly is specified as a 3/8″...

The Holt Stainless-Steel Rudder Clip is a reliable retaining clip designed to secure the rudder blade in place on dinghies such as the Laser/ILCA class. Its stainless steel construction ensures durability and corrosion resistance - particularly...

The Holt Laser Batten Set (HT7010) is a high-quality replacement set designed for Laser® sails, including the Mk1 Standard, Radial, and 4.7 models. These battens are ideal for club sailing, training, and recreational use. Please note that they are...

Holt’s mast and boom assembly replacements are engineered to give ILCA/ Laser dinghy sailors a high-quality, fit-for-purpose spar set at budget-friendly levels. These assemblies are especially suited for club sailing, training, or casual use,...

Holt HT91104 Nautos Laser L1 Replacement Stainless Steel Gooseneck Holt parts are high quality replacements that perform the same function as the original part. They should not be confused with official parts bearing the Laser® registered trademark...

Holt HT7003 Laser Replacement L1 Rudder Head With Ring Holt Replacement Rudder Head suitable for the Laser® hull. High quality replacements that perform the same function as the original part. They should not be confused with official parts bearing...

Holt HT7111 Laser Replacement L1 Swivel Vang Assembly Laser Vang Assembly Kit - consists of: 1 x Vang Unit With Cleat (additional wedge for optional higher cleat angle with fastenings) 1 x High Tension Top Block With Kicker Key 1 x Double Block &...

ILCA Clew Strap, the strap holds the clew tightly in place using Velcro and through clever design it is easy fitted and yet still slips nicely along the boom.

Pair of mast rig support holders for ILCA Laser spars - Made in Foam, these holders have slots to hold up to 5 spars. Placed on the desk and under the cover, these supports give good protection to your valuable spars.

Complete package of Laser® and ILCA® protection for maststep, mast, tiller, outhaul and daggerboard. Contains 2 disks for the maststep, 2 stripes for the maststep and mast deck, 2 stripes for snug fit of the top mast section, 1 stripe for the...

Precision made, high performance carbon tiller to suit all models ILCA and Laser sailboats.  Features  Flat low profile design Stainless steel travellerwear plate  Suitable for perfromance sailing 

ILCA/Laser Tiller composite construction including flexible joint and rudder down cleat - Class legal for ILCA events. Features Flat plate design Composite carbon fibre and epoxy Includes RWO tiller joint

Outhaul system for ILCA® 6 & 7 Laser Radial & Mk2 with a spliced 3 mm Dyneema® primary line with a 29 mm Harken Ti-Lite block. Made with a large loop which fits around the end of the boom for quick release. Comes with a 4 mm DB-Racing...

8:1 Downhaul system for ILCA 7 and Laser Full Rig comprising  spliced 4 mm Dyneema® primary line and two Harken blocks, the 29 mm T2 soft-attach block and the 18 mm Fly-Soft block. Comes with a 4 mm DB-Racing secondary control line, consists of...

ILCA Laser Centreboard Stop Set by Holt How to assemble Align the first cap fitting to the centre shaft and push down hard to until the shaft is flush with outer side of cap  Fit the part assembled unit to the centreboard and then align and...

Optiparts EX2150 mid boom mainsheet block for Laser and ILCA all models - Schools or Club version. Fitting Instructions Drill out old rivets to remove the boom eye and replace using 4.8mm x 12mm Stainless Rivots Specifications Sheave diameter: 40...

Ex-Charter Element ILCA 6 - Sailed 1 Event Only - Australia All ex-Charter boats include: stacking trolley, foil bag, top cover & sail bags. Full carbon rig - upper & lower mast  Latest Numbers 223+++ Excellent condition with NEW ropes...

The Mersea 6 boat road trailer is perfect for large sailing teams. It is well balanced and easily transports 6 ILCA/ Lasers with plenty of room for sails, gear & mast tubes. With the Lighting board extending bracket and the light...

The Mersea 8 x 4 double rack, ILCA / Laser box trailer is the perfect regatta event support trailer. It is well balanced and easily transports 2 Lasers with plenty of room for sails, gear & mast tubes. 2 x Mast Rig Tubes...

An ultra-stiff, lightweight 20 mm carbon tiller extension from Windesign, including a rubber tiller joint with rope core, releasable base with pin and tubing, and fitted with x-gripped heat-shrinkable tubing. Perfect for ILCA and Laser class and other...

Ovington's ILCA Laser 22mm x 125mm carbon tiller extension with Optiflex Tiller Joint fitted - Carbon construction with spiral textured grip and flush ruberrised end cap This is the preferred size for ILCA / Laser event...