International Gelshield 200 Epoxy Primer - 2.5L

International Gelshield 200 is a quick drying and easy to apply epoxy primer, that protects GRP against osmosis. You can use it down to just 5°C and as it’s fast drying, you can apply multiple coats in one day.

Features

• Provides protection against osmosis in five coats (250 µm).
• It’s fast dry times means you can apply multiple coats in one day
• Very easy to apply and can be used down to 5°C

Specification

• Brand: International
• Capacity: 2.5L
• Area: Above the Waterline & Below the Waterline
• Suitable for: Hull
• Finish/Sheen: Matt
• Substrates: GRP/FRP
• Application Method: Brush, Roller
• Recommended Number of Coats: 5
• Practical Coverage (Brush & Roller): 8.10 m²/L
• Typical Shelf Life: 2 Years

Colour Avaliablity

• Green 
• Grey

Preparation

• BARE GRP Wash down with Super Cleaner, rinse with fresh water and allow to dry. Sand with 180 grade (grit) paper. 
• PREVIOUSLY ANTIFOULED SURFACE Remove using Interstrip. Wash down with Super Cleaner, rinse with fresh water and allow to dry. Sand with 180 grade (grit) paper. 
• EXPOSED LAMINATE Gelshield Plus is a high build epoxy primer best suited for bare laminate.

Method

Remove any dust from the surface. Apply required number of coats, detailed in the specification sheets (minimum 250 microns DFT). For ease, alternate the grey and green colours starting and ending with grey. BILGES: Apply 2 coats only provided there is a gelcoat on the inside of the hull. If no gelcoat, use Gelshield Plus.

Hints

• Mixing: Stir or shake individual components thoroughly. Add Curing Agent to the Base, stir and leave for 10 minutes to allow bubbles to disperse.
• Thinner: YTA061 Thinners No.7
• Other: Can be used down to 5°C but for maximum performance, temperature should be above 10°C.

Hazard Warnings

Hazard Pictogram :
Signal Word:	Danger
Hazard Statements:	Flammable liquid and vapour Causes serious eye damage Causes skin irritation May cause an allergic skin reaction May cause respiratory irritation Harmful to aquatic life with long lasting effects
Precautionary Statement:	General: Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Prevention: Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Response: IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF ON SKIN: Take off contaminated clothing and wash it before reuse. IF IN EYES: Immediately call a POISON CENTER or physician. Storage: Keep cool. Disposal: Dispose of contents and container in accordance with all local, regional, national and international regulations.
Hazardous Ingredients	Green , GreyReaction product: bisphenol-A-(epichlorhydrin) and epoxy resin, 700
Supplemental Label Elements	Wear appropriate respirator when ventilation is inadequate.

Technical Files

Technical Data Sheet

Green Part A - Safety Data Sheet

Green Part B - Safety Data Sheet

Grey Part A - Safety Data Sheet

Grey Part B - Safety Data Sheet