null
Ireland EU online store
International

International Matting Additive for Single Pack Finishes - 750ml

SKU:
85350
UPC:
5035686113428
SEK385.58

Description

International Matting Agent - The finishing touch to your job can make all the difference. Simply mix matting additive with International one pack finishes or varnishes to create a variety of gloss, satin or matt effects.

Features

  • Creates a variety of gloss, satin or matt effects
  • Suitable to add to one pack finishes and varnishes
  • Easy to use

Specification

  • Brand: International
  • Capacity: 750ml
  • Area: Above the Waterline
  • Suitable for: Exterior cabin/trims, Interior cabin/trims
  • Finish/Sheen: High Gloss
  • Suitable Water Types: Sea Water, Fresh Water, Brackish Water
  • Substrates: Wood
  • Application Method: Brush, Conventional Spray, Roller
  • Recommended Number of Coats: 3 - 5
  • Practical Coverage: 12.90 m²/L
  • Typical Shelf Life: 2 Years

Preparation

Preparation Follow the surface preparation instructions shown on the label of the finish or varnish to which the Matting Additive is being added.

Method

Pour the amount you expect to use in a separate container. Avoid using direct from the can. Strain it through a paint strainer to ensure there is no contamination. Do not apply too thickly.

General Hints

Mixing Guidelines

  • 25% addition of the Matting Additive by volume to achieve up to a 30% reduction in gloss
  • 50% addition of the Matting Additive by volume to achieve up to a 80% reduction in gloss
  • 75% addition of the Matting Additive by volume to achieve up to a 95% reduction in gloss

For large areas, ensure full required volume of matted paint is mixed prior to commencing application.
Matt appearance may vary with colour.


Thinners:  YTA800 Thinners No.1
Thinning:  Matting Additive may be thinned by 5% prior to mixing with Topcoat or Varnish. Use Thinners No.1.
Conventional Spray: (Professional spray application only) Pressure: 3­4 bar. Tip Size: 1.1­1.4 mm. For spray
application of matted 1­pack varnishes or finishes, follow instructions on the datasheet for the product in question.

Other: The addition of Matting Additive to a finish or varnish will not affect the drying or overcoating characteristics of
the product. It will not affect the durability of the finished surface. As with all the types of reduced­gloss coatings, the
resulting finish will not have the same stay­clean properties as a full­gloss coating. If all the mixed (matted) material is not
used it may be used at a later date. Simply stir well before use. Testing on a non­critical area should be carried out prior
to full­scale application. 

Datasheets

International Matting Additive

International Matting Additive Safety Datasheet

View AllClose