null
Ireland EU online store
International

International Super Gloss HS Topside Paint

SKU:
85310
£27.29

Description

International this is "Very easy to use, even at low temperatures, Super Gloss HS can be applied by roller without tipping-off. This makes it incredibly easy to achieve a high-gloss finish with good durability. "

Features

  • Designed for easy roller application
  • Delivers full opacity in just 1-2 coats
  • High solids formulation with low VOC and reduced odour

Specification

  • Brand: International
  • Capacity: 750 ml
  • Area: Above the Waterline
  • Suitable for: Hull
  • Finish/Sheen: High Gloss
  • Substrates: Aluminium / Zinc-Galvanised Steel, GRP/FRP, Steel, Wood
  • Application Method: Brush & Roller
  • Recommended Number of Coats: 1 - 2
  • Practical Coverage: 12 m²/L
  • Typical Shelf Life: 2 Years

Colour Avaliablity

  • White
  • Black
  • Whale Grey
  • Ocean Blue
  • Light House Red
  • Thames Green
  • Bhama Beige
  • Artic White
  • Atlantic Blue
  • Pearl White

Preparation

PREVIOUSLY PAINTED SURFACES

  • In Good Condition: Wash down with a suitable detergent, rinse with fresh water and allow to dry. Abrade with 280­ 320 grade (grit) paper and remove sanding dust.
  • In Poor Condition: Remove all previous coatings and prime the substrate.

BARE WOOD/PLYWOOD: Sand smooth with 80-180 and then 280 grade paper. Remove sanding dust by brushing or dusting. Wipe down thoroughly with solvent and allow to dry completely. Ensure that residual sanding dust is removed before product application. Prime using an International Primer.

OILY WOODS e.g. Teak: Ensure that the surface is thoroughly degreased using a suitable solvent to ensure all oils are removed. Sand smooth with 80-180 and then 280 grade paper. Remove sanding dust by brushing or dusting. Wipe down thoroughly with solvent and allow to dry completely. Ensure that residual sanding dust is removed before product application. Prime using an International Primer.

ALUMINIUM: Degrease with solvent or suitable detergent cleaner. Sand well using 60-120 grade (aluminium compatible) paper. Clean thoroughly and allow to dry. Prime using an International primer as soon as possible (within 8 hours) following product recommendations.

STEEL: Degrease with solvent or suitable detergent cleaner. Gritblast to Sa 2½ near white metal surface. If gritblasting is not possible, grind the metal surface with 24-36 grit abrasive discs to a uniform, clean, bright metal surface with a 50­ 75 microns anchor pattern. 

GRP: Degrease with solvent or suitable detergent cleaner. Sand well using 180-­220 grade paper. Clean thoroughly and allow to dry completely. No primer required , apply an International Prekote Undercoat direct to GRP.

AGED/WEATHERED GELCOATS: Degrease with solvent or suitable detergent cleaner. Sand well using 180­220 gradeper. Clean thoroughly and allow to dry completely. To avoid potential pinholing, apply 3 coats of an International 2 packepoxy primer which must be then overcoated with an International 2 pack undercoat prior to topcoat application.

ALL SUBSTRATES: Use One UP.
ALL BARE SURFACES: Use a suitable primer system followed by One UP as a primer and apply in 2 coats. Note: a polyester gelcoat can be directly treated with One UP and Super Gloss HS.

Method

Stir well before use.

Hints

  • Thinner: Thinner No.1; consult with local representative for temperatures >25°C
  • Thinning: 0­10% v/v (maximum) may be added to ease application (depending on colour)
  • Cleaner: Thinner No.1
  • Brush: Thinning is not usually required.
  • Roller: Thinning is not usually required.
  • Ventilation and Humidity Control: Apply in dry, well ventilated conditions. Avoid applying late in the evening ascondensation can cause a loss of gloss overnight.

Hazard Warnings

Hazard Pictogram :
Signal Word: Warning
Hazard Statements:

Flammable liquid and vapour
May cause drowsiness or dizziness
Harmful to aquatic life with long lasting effects

Precautionary Statement: General:

Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand.

Prevention:

Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid release to the environment.

Response:

IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.

Storage:

Keep cool.

Disposal:

Dispose of contents and container in accordance with all local, regional, national and international regulations.

Hazardous Ingredients

All Colours: Hydrocarbons, C9-C11, N-alkanes, Isoalkanes, Cyclics.

Supplemental Label Elements

Contains 3-iodo-2-propynyl butylcarbamate. May produce an allergic reaction.

Technical Files

Technical Data Sheet

Ireland IrelandWhite - Safety Data Sheet

Ireland Ireland Black - Safety Data Sheet

Ireland Ireland Whale Grey - Safety Data Sheet

Ireland Ireland Ocean Blue - Safety Data Sheet

Ireland Ireland Light House Red - Safety Data Sheet

Ireland Ireland Thames Green - Safety Data Sheet

Ireland Ireland Bhama Beige - Safety Data Sheet

Ireland Ireland Artic White - Safety Data Sheet

Ireland Ireland Pearl White - Safety Data Sheet

Ireland Ireland Atlantic Blue - Safety Data Sheet

View AllClose