null
Ireland EU online store
International

International Ultra 300 Antifoul for High Speed Craft - 750ml

Over 40 Knots
€68.95

Description

International Ultra 300 is our ultimate hard antifouling, providing 1-year protection ideal for powerboats or any streamlined yacht, even in the harshest fouling conditions. Use antifouling paints safely. Always read the label and product information before use.

Features

  • Allows scrubbing and polishing for an ultra-smooth finish
  • Premium performance, even in harsh environments
  • Maintains protection even after hauling

Specifications

  • Brand: International
  • Capacity: 750ml
  • Area: Below the waterline
  • Substrates: GRP/FRP, Lead, Steel, Wood, Cast Iron
  • Suitable for: Hull
  • Finish/Sheen: Matt
  • Type of Antifouling: Hard
  • Suitable Water Types: Sea Water, Fresh Water, Brackish Water
  • Application Method: Brush, Roller, Airless Spary
  • Recommended Number of Coats (Airless Spray): 1 - 2
  • Recommended Number of Coats (Brush & Roller): 2 - 3
  • Practical Coverage (Roller & Brush): 9 m²/L
  • Practical Coverage (Spray): 3 m²/L
  • Typical Shelf Life: 2 Years

Colour Availablity

  • Black
  • Navy
  • Green
  • Blue
  • Dark Grey
  • Dover White
  • Red

Preparation

PREVIOUSLY ANTIFOULED SURFACE

In Good Condition: All fouling and contamination must be thoroughly removed including the leached layer. Use high pressure fresh water wash (3000 psi/207 bar) and/or scraping and wet sanding with typically 80-120 grade paper. Do not dry sand. If old antifouling is incompatible or unknown, seal with suitable International Paint barrier/sealer coat.

In Poor Condition: Use Interstrip to remove all traces of antifouling.

PRIMING: All preparation for bare substrates is covered on the appropriate primer datasheet.

BARE GRP: Prime with Gelshield 200 for osmosis protection, or Primocon or Interprotect.

STEEL/IRON/LEAD/WOOD: Prime with Interprotect or Primocon.

Hints

  • Mixing: Thoroughly stir until product is mixed to a uniform consistency before use
  • Thinning: Thinning is not recommended. Antifouling performance can be compromised if correct dry film thickness is not applied.
  • Cleaner: YTA085 Thinner No.3
  • Airless Spray: Pressure: 176-210 bar/2500-3050 psi. Tip size: 517 to 521.
  • Ventilation and Humidity Control: Ensure adequate ventilation during use.
  • Other: Antifoulings should only be wet sanded. Never dry sand or burn-off old antifoulings. True colour will develop after immersion.

Hazard Warnings

Hazard Pictogram :
Signal Word: Danger
Hazard Statements:

Flammable liquid and vapour
Causes serious eye damage
Causes skin irritation
May cause an allergic skin reaction
Very toxic to aquatic life with long lasting effects

Precautionary Statements: General:

Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand.

Prevention:

Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid release to the environment.

Response:

IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF ON SKIN: Take off contaminated clothing and wash it before reuse. IF IN EYES: Immediately call a Poision Center or physician.

Storage:

Keep cool.

Disposal:

Dispose of contents and container in accordance with all local, regional, national and international regulations.

Hazardous Ingredients

Dover White, Red, Blue, Navy, Black, Green, Dark Grey: : Dicopper oxide, Rosin, Fatty acids, C18-unsatd., trimers, compds. with oleylamine, Fatty acids, tall-oil, compds. with oleylamine

Supplemental Label Elements

Wear appropriate respirator when ventilation is inadequate.

Technical Files

Technical Data Sheet

Ireland Ireland Dover White - Safety Data Sheet

Ireland Ireland Red - Safety Data Sheet

Ireland Ireland Blue - Safety Data Sheet

Ireland Ireland Navy - Safety Data Sheet

Ireland Ireland Black - Safety Data Sheet

Ireland Ireland Green - Safety Data Sheet

Ireland Ireland Dark Grey - Safety Data Sheet

View AllClose