Jabsco 50200 Series 1 1/2'' Electric Magnetic Clutch Pump - Single Pulley - 12V (5A)

Jabsco 1.5" 38 mm bronze pump, 200 size, foot-mounted with BSP threaded ports available in 12 V DC and single pulley.

The Jabsco Jabsco 1.5" Magnetic Clutch Pumps can output 195 litres per minute and is suitable as a heavy-duty bilge and deck wash pump which runs off an engine with 1500 rpm.

Very heavy-duty bilge, deck wash, and firefighting pump, belt-driven from the engine, for leisure and commercial craft.

Jabsco 12V foot-mounted clutched pump for bilge and deckwash applications. The pump has 1-1/2" BSP female ports and is 200mm long with a 180mm pulley diameter (1B pulley) and 152mm across the ports. The Jabsco clutched pump is capable of pumping 195 litres per minute (43 gallons) at 3 metres total head.

This heavy-duty bilge and deckwash pump has a bronze body, stainless steel shaft, mechanical shaft seal and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. A nitrile impeller may be fitted for use with oily water. The pump can self-prime up to 3 metres of vertical lift and is tolerant to moderate amounts of suspended solids.

Features

• Neoprene impeller is fitted as standard
• Bilge debris presents no problems to this robust, bronze-bodied flexible impeller pump
• It can be remotely controlled from outside the engine room, and can be automatically shut off by fitting a vacuum cut-off switch
• Heavy-duty bilge and deck wash pump
• Bronze body, stainless steel shaft, mechanical shaft seal
• Neoprene impeller fitted as standard for maximum performance with clean or lightly contaminated water
• Can pump in either direction
• Handles hard and soft solids without clogging
• Easy to service and maintain
• Will tolerate abrasive wear
• Constructed from marine-quality bronze and stainless steel
• Can handle moderate amounts of suspended solid matter
• Will not airlock

Specifications

• Flow output: 48.75 GPM (195 LPM)
• Bearing type: Twin single row ball
• Total head: 10' (3 m)
• Nominal speed: @ 1500 rpm
• Self-Priming: Up to 15' (4.5 m) vertical lift
• Port type: BSP
• Port size: 1-1/2" (38 mm)
• Fuse size: 5A
• Pulley E/M clutch: 1B
• DC voltage: 12V
• Mount type: Foot
• Height: 7" (17.8 cm)
• Wide: 6" (15.3 cm)
• Length: 9-1/2" (23.9 cm)
• Weight: 25 lb (11.2 kg)

Material of Construction

• Body material: Bronze head, cast Iron bearing
• Impeller material: Neoprene
• Shaft material: 316 Stainless steel
• Shaft seal material: Mechanical, carbon-ceramic

Spare Parts and Accessories

• Vacuum switch
• Impeller
• Impeller removal tool: 200/270/370/470/500 size pumps
• Service Kit
• Brass Reducing Bush 1.5" - 1.25" BSP
• 1 1/4" Hose Adapter
• 1 1/2" Hose Adapter

Dimension Drawing

Technical Files

Datasheet

Maintenance Instructions