ILCA Laser Adhesive Ireland Sail Flag 35 x 58cm

Irish national flag for use with ILCA Laser Sails requiring sail identification.

Specifications

• Size: 567 mm x 337 mm

Rules

If required by the Notice of Race and the Sailing Instructions, a national flag with a nominal size of 567 x 337 mm shall be applied to both sides of the mainsail. For the Standard and Radial sails, flags shall be positioned such that the aft edge of the flag is within 100 and 150 mm of the leech and between the sail numbers and the batten pocket below the sail numbers. The flag shall be approximately parallel with the sail numbers and letters and shall not touch the numbers. For the 4.7 sail, the flag shall be positioned within 100 and 150 mm of the leech but below and within 50 mm of the bottom batten pocket. The flag shall be printed on separate material applied to the sail. The use of permanent ink pens or similar to make a national flag is forbidden. The national flag shall correspond to the national letters. 

IRL numbers for Cruiser / Racers are issued in sequence from the ‘Other Sailing Class’ section of the ISA database. The next available number will be issued for a boat. A selected IRL number can be requested subject to availability. These numbers are reserved for a period of 48 hours subject to payment of the appropriate fee. The number will be released and be available for another boat if the application and fee is not completed in that time.