Laser Performance

The Laser Pico Mainsail 94611 fits the Laser Pico Sailing Dinghies. The Pico main sail is 5.14 m2 of sail with blue and white panels. The main sail is made from a Dacron sail material and comes...

The Laser Pico Mainsail (94611) is the official replacement sail for Laser Pico sailing dinghies, built for durability and reliable performance on the water. Constructed from high-quality Dacron...

The Laser Pico Mainsheet Padeye 91303 is the official stainless-steel deck fitting designed specifically for Laser Pico dinghies. Precision-engineered for durability and strength, this genuine Laser...

Laser Bahia/Bug/Stratos Oarlocks sold 2 per pack. Dimensions 5cm × 2.5cm × 2cm

The Laser Boom Vang Plate with Key Slot fits onto the boom and can be used to attach the Laser Kicker system as a quick connect. Specification Laser part no: 91535

The Laser Lower Section Mast Plug fits the Radial/Pico/Funboat dinghies. Feature Fits the mast base (lower section) Specification Laser part no: 90641

Laser Bahia Stock Pin supplied by RS Sailing. The long rudder pin attaches the rudder head to the gudgeons. Feature Made in stainless steel Specification RS part no: BAH-FO-900

Laser Bahia Tiller Extension as supplied by RS Sailing. Feature Suitable for training and recreation. Specification Length: 901mm

The Laser Vago Trapeze Wire comes with stainless steel wire pre-attached to a rope jammer and a plastic handle. Features Controls the trapeze height Pre-assembled for easy...

The Laser Rudder Retaining Clip screws (screws sold separately) onto the transom of your dinghy and are used to secure the rudder in place. Feature Made from stainless steel

Laser Bahia Forestay (wire and rope included) are supplied by RS Sailing and can be directly fitted onto your boat. Come swith crimped attachment fitting for the mast. Specifications Suits: Laser...

Laser Vago Gennaker Pole as supplied by Laser UK. Comes with end caps and fittings. Specifications Material: Aluminium Laser part no: 89803

Laser Vago batten set and Laser Vago sailboat sails in stock at Sailcenter

The Laser Vago Mast Shroud comes wirh attachement riggin for the mast for an easy install. One shroud per pack. Specifications Material: Stainless Steel Laser part no: 90215

The Laser Vago Jib Halyard comes with a length of 3-strand rope, stainless steel wire, and a crimped eye for rigging. Feature Jib wire halyard and spliced rope tail Specification Laser part no:...

Standard Nylon Washer for the Laser-branded sailing trolleys.

The Laser Bahia Mast Step is supplied by RS Marine. It comes in aluminium and is use dto attach the mast to the deck of the Bahia.  

Laser Drop Nose Pin to fit the Vago/Bahia/Pico boats. Specifications Size: 6mm x 64mm Material: Stainless Steel

The RS Laser Bahia Mast Shroud Lower comes with a pre-spliced eye, rigged key fitting and wire for easy install.

The Laser Pico Mast Step fits the mast to the deck of your boat. 4 holes to bolt it to the hull. Specifications Material: Plastic Colour: Black Laser part no: 91299

The 25mm plain bearing block range is one of Sea Sure's oldest and best selling ranges. The range uses marine grade stainless steel side plates and rivets with an arnite (plastic) sheave which is...

The Laser Vago Trapeze Kit contains everything you need to install or replace a trapeze on your boat including wire (with pre-rigged key fittings), handles, camcleats, blocks and rope. Pre-assembled...

The Laser Bahia Cap Shroud is supplied by RS Marine and comes complete with rigging attachments for an easy install. Specification Stainless steel wire

Laser Top Vang Block with V-Jammer is a clasic non-race jammer for the Laser Vang system. Made from aluminium. Specifications Sheave diameter: 20 mm / 40 mm Max line diameter: 6 mm

The Laser Funboat Trolley is designed to help you launch and take your boat out of the water. The frame is made from galvanized steel and comes with inflatable tyres that can be replaced if needed...

The Laser Trolley Stacker is a galvanized support that fits onto the side of your Laser trolley and allows you to carry two or more boats at the same time. Features Water-resistant galvanized...

The Laser Pico Trolley Stacker is a galvanized support that fits onto the side of your Laser trolley and allows you to carry two or more boats at the same time. Features Water-resistant galvanized...

A set of Laser MK1 Battens to suit Laser Standard, Radial, and 4.7 Sails. Features The old-style design is no longer used for racing events 3 per pack (suitable for one sail) Strong and flexible...

Laser XD Deck Plate Stainless Steel Features Deck plate to attach the outhaul and Cunningham blocks Stainless steel

The Laser Bahia Trolley Stacker is a galvanized support that fits onto the side of your Laser trolley and allows you to carry two or more boats at the same time. Features Water-resistant galvanized...

The Laser Funboat Mainsail Small Rig is a direct replacement for the Laser Funboat sailing dinghy. Features Small rig size Extra-strength polyester Training or club use Specifications Material: 6...

The Laser Standard Sail Mk II Folded is an official replacement for the one on your sailing dinghy and can only be used for recreational (non-race) use. Features Comes with The Laser Class button...

The Laser Vago Deck Cover 87113 is a waterproof polyestercover to protect your sailing dinghy from while not in use.

RS Sailing Toestrap to fit the middle section of a Laser Pico Dinghy. Specifications RS part no: PIC-HF-400

RS Laser Bahia Gennaker Sail - New Design Specification Colour: Red

The Laser XD Power Pack contains Harken Main Sheet & Traveller lines, and also the blocks for each, included in a handy set. Features Pre-cut sheets for the Laser Standard Taveller and Main...

RS Laser Bahia mainsail in dacron, supplied with battens and sail bag - Original Laser Performance version Specifications The Laser Bahia mainsail size is 9.50 m² This is the smaller reefable...

Laser 4.7 bottom section is anodized aluminium tube including lower mast plug, kicker, and gooseneck fittings.  The Laser 4.7 Lower Mast is pre-bent with a 5-degree angle as standard...