null
Ireland EU online store

Laser Rudders and Centreboards

Laser Rudders and Centreboards

  • Optiparts ILCA/ Laser Protection Pack

    Optiparts ILCA/ Laser Protection Pack

    Optiparts

    CAD89.04
    Complete package of Laser® and ILCA® protection for maststep, mast, tiller, outhaul and daggerboard. Contains 2 disks for the maststep, 2 stripes for the maststep and mast deck, 2 stripes for snug fit of the top mast section, 1 stripe for the...
    OPEX2001
    CAD89.04
  • Holt Monel Metal Rivets 1/4X1/2

    Holt Monel Metal Rivets 1/4X1/2 (3 Pack)

    Holt

    CAD14.53
    Holt Marine Pre Packs - Monel Metal Pop Rivets Monel is is resistant to corrosion and acids so will not rust Ideal for fixing fittings on masts and booms A rivet gun will be required for fixing rivets
    HA389
    CAD14.53
  • Holt Laser Rudder Retaining Pin with Cord 70141

    Holt Laser Rudder Retaining Pin with Cord 70141

    Holt

    CAD10.15
    ILCA or Laser tiller retaining pin to secure the tiller to the rudder head, supplied with securing cord Note If your tiller is not drilled to receive the retaining pin, ensure the tiller is firmly pressed into the head before drilling the location hole...
    HT70141
    CAD10.15
  • Laser All Boats Rudder Clip Ring

    Laser All Boats Rudder Clip Ring

    Laser

    CAD1.39
    A rudder ring is a must if you would like to keep your Rudder. It provides a secondary attachment of the rudder to the hull preventing detachment. Make sure you have a rudder ring fitted to save you money in the future.
    LS-85314
    CAD1.39
  • Optiparts Foil Protector Set for Laser - Clear

    Optiparts Foil Protector Set for Laser - Clear

    Optiparts

    CAD14.53
    The Inexpensive, clear hard plastic profiles which fit over the traling edge of the Laser daggerboard and rudder. Protects your Laser foils from damage in storage or transportation. Specifications Material: Plastic Colour: Clear
    OPEX2059
    CAD14.53
  • ILCA LaserRudder Retaining Clip ILC5954

    ILCA / Laser Rudder Retaining Clip

    ILCA

    CAD7.23
    The ILCA Laser rudder retaining clip prevents the rudder popping up and becoming detached. The rudder clip is easy to fit but remember to use Sikaflex or similiar sealant to keep the hull watertight.
    ILC5954
    CAD7.23
  • ILCA Laser Daggerboard Stop Sets

    ILCA Laser Daggerboard Stop Sets

    ILCA

    CAD14.53
    ILCA Laser Centreboard or Daggerboard Stops - These push-together sets prevent the Daggerboard dropping too low  How to assemble Allign the first cap fitting to the centre shaft and push down hard to until the shaft is flush with outer side of...
    ILC3916
    CAD14.53
  • Laser Performance Friction Pad - MK2

    ILCA Laser Friction Pad - MK2

    ILCA

    CAD24.76
    The ILCA Laser Friction Pad MK2 is screwed to the back of your daggerboard casing and allows for perfect grip and slip ratio when raising the board.
    LS-91538
    CAD24.76
  • Laser Performance Friction Pad - MK1

    Laser Performance Friction Pad - MK1

    Laser

    CAD30.60
    The MK1 flat back rubber friction pad for the deck of any Laser dinghy designed as a friction plate to keep the Laser daggerboard in place during sailing.
    LS-85239
    CAD30.60
  • ILCA Laser Rudder Retaining Pin

    ILCA Laser Rudder Retaining Pin

    ILCA

    CAD5.77
    This ILCA / Laser tiller retaining pin secures the tiller to the rudder head. Note If your tiller is not drilled to receive the retaining pin, ensure the tiller is firmlypressed into the head before drilling the location hole to ensure solid fit
    ILC3925
    CAD5.77
  • Laser Performance Rudder Head

    Laser Performance Rudder Head

    Laser

    CAD284.86
    The Laser rudder head is a aluminium construction complete with a rudder ring and tilller retaining pin. Rudder fittings are stainless steal for long lasting, please make sure you rudder head has the approve sticker for eventing. Comes with rudder...
    LS-85135
    CAD284.86