Laser Rudders and Centreboards

Laser Bahia Stock Pin supplied by RS Sailing. The long rudder pin attaches the rudder head to the gudgeons. Feature Made in stainless steel Specification RS part no: BAH-FO-900

The Laser Rudder Retaining Clip screws (screws sold separately) onto the transom of your dinghy and are used to secure the rudder in place. Feature Made from stainless steel

Complete package of Laser® and ILCA® protection for maststep, mast, tiller, outhaul and daggerboard. Contains 2 disks for the maststep, 2 stripes for the maststep and mast deck, 2 stripes for snug fit of the top mast section, 1 stripe for the...

ILCA Laser Centreboard Stop Set by Holt How to assemble Align the first cap fitting to the centre shaft and push down hard to until the shaft is flush with outer side of cap  Fit the part assembled unit to the centreboard and then align and...

Holt Marine Pre Packs - Monel Metal Pop Rivets Features Monel is resistant to corrosion and acids, so it will not rust Ideal for fixing fittings on masts and booms A rivet gun will be required for fixing rivets

ILCA or Laser tiller retaining pin to secure the tiller to the rudder head, supplied with securing cord Note If your tiller is not drilled to receive the retaining pin, ensure the tiller is firmly pressed into the head before drilling the location hole...

Optiparts ILCA Laser GRP Rudder Head fitting including Pivot Bolt. Compatible with all ILCA and Laser Rigs - Schools or Club version. Not approved for ILCA official events. Features Aluminium/ Stainless Steel construction School/ Club Version ...

A rudder ring is a must if you would like to keep your Rudder. It provides a secondary attachment of the rudder to the hull preventing detachment. Make sure you have a rudder ring fitted to save you money in the future.

The Inexpensive, clear hard plastic profiles which fit over the traling edge of the Laser daggerboard and rudder. Protects your Laser foils from damage in storage or transportation. Specifications Material: Plastic Colour: Clear

The ILCA Laser rudder retaining clip prevents the rudder popping up and becoming detached. The rudder clip is easy to fit but remember to use Sikaflex or similar sealant to keep the hull watertight. Features Will secure the rudder to the transom You can...

ILCA Laser Centreboard or Daggerboard Stops - These push-together sets prevent the Daggerboard dropping too low. How to assemble Align the first cap fitting to the centre shaft and push down hard to until the shaft is flush with outer side of...

The MK1 flat back rubber friction pad for the deck of any Laser dinghy designed as a friction plate to keep the Laser daggerboard in place during sailing.

Laser Rudders Gudgeons by Holt - 2 Required per boat  Fasteners 2 x Sowester Pan Head Self Tappers per Gudgeon - Size  8 x 1 1/2"  Select size here

Replacement gudgeon for the ILCA dinghy and Laser sailboat. Two of these are mounted on the transom of the boat and used for attaching the rudder head. Installs with 4 screws (not included). Sold individually and made from a heavy duty plastic for long...

This ILCA / Laser tiller retaining pin secures the tiller to the rudder head. Note If your tiller is not drilled to receive the retaining pin, ensure the tiller is firmly pressed into the head before drilling the location hole to ensure solid fit.

Official ILCA Rudder Head comes with rudder megabolt. Suits all models ILCA 4, 6 & 7 and Laser 4.7, Radial and Full Rig.

The Laser rudder head is an aluminium construction complete with a rudder ring and tiller retaining pin. Rudder fittings are stainless steel for long-lasting use. Please make sure your rudder head has the approved sticker for eventing. Comes with rudder...

Older style articulated stainless steel tiller joint for smaller sailing dinghies

High quality, reliable RWO Omniflex Tiller Joint to suit most dinghy tiller extension, including ILCA Laser, Topper, and many others. This Omniflex joint is made from Elastomeric polymer which allows all directional flexibility. The fitting includes a...

The ILCA Mega Bolt is the pivot bolt to fit the Rudder Head to the Rudders Plade - Supplied with 20mm Washers.

The Laser XD rudder head pivot bolt is an upgraded, large-diameter bolt and nylock nut with 20 mm washers. The rudder bolt will hold your rudder blade firmly in place.

Official ILCA fused rudder blade only - Suits all Rigs and Class legal for all ILCA events. Features Infused GRP rudder blade - blade only Fits the ILCA rudder head Note Also suits Laser (Torch logo) Sailboats.

Laser shock cord retainer with plastic clip keeps dagger board in place. Specifications Colour: Black Length: 7 mm

Laser Performance Daggerboard Infused.