Laser Vago

Our Laser Vago training jib sails are made from a hard-wearing ripstop racing Dacron material, 5.2oz weight. Our training jibs are white and come with all of the reinforcement you would expect including at the batten pocket areas and corners. Eyelets are...

Rudder Stock with Tiller to suit RS Ocean Play Vago - Also suits earlier Laser Vago models. Specification Dimension: 40 × 40 × 15 cm  

Laser Bahia / Vago mast jib sheave box with nylon pulley 90623 - (Selden 505-071-01 )

The Laser Vago Mast 89007 is a fully rigged mast complete with all fittings, halyards, standing rigging wires, and spreaders. Please note this item is not held in stock and comes with a lead time. Please contact us for a lead time and delivery...

Replacement Mast for the Laser Vago sailing dinghy without rigging included. Fully rigged mast complete with all fittings, halyards, standing rigging wires, and spreaders Please note this item is not held in stock and comes with a lead time. Please...

The RS Laser Vago 9.31 m² rolled mainsail with clear visor panels in Mylar, including a long sail bag. Specification Size: 9.31 m²

The Laser Vago Standard 7.56 m² rolled main sail with white panels and reefing points made from Dacron including long sail bag. Specifications Material: Dacron Panel colour: White Size: 7.56 m²

Laser Performance Vago Boom - Fully Rigged.

Genuine RS Laser Vago Gennaker Sails - Standard model VAG-SA-300 including Sail Bag The Laser Vago race gennaker/kite is the sail at the front of the boat to be used when going downwind and reaching. The Vago race kite is larger than the standard Vago...

Laser Performance Vago Gennaker Sock.

The Laser Vago Standard Gennaker 10.85 m² rip stop nylon in yellow including sail bag. Specifications Material: Nylon Colour: Yellow

Laser Selden Mast Step attached to the cross beam on your boat with 2 x rivets (sold separately). Connection bolt supplied for the Vago Mast. Features Attached to the main cross beam Weight (kg): 0,052  

These combined swivelling deck fairlead and cam cleat assemblies are used for the jib sheet on both sides of the boat. Requires 3 x rivets for attachment (sold separately). For the replacement cleat on its own (See Code: LS-91484).

The replacement Halyard Bag to suit the Laser Vago sailboats.

Vago rudder is supplied complete, ready to sail, including tiller extension, in stock at Sailcenter. Assembled, ready to sail, rudder head, tiller, rudder blade, and extension.

Laser Vago mainsheet is an 8 mm lightweight polypropylene main sheet. This mainsheet is used on the Laser Vago and Laser Bahia Laser Bahia and Vago mainsheet block assembly. Does not include standup pulley (See Code: LS-91333).

Trapeze Loop with block pulley for the Laser Bahia sailing dinghy.

This infused GRP centerboard is a multi-boat centerboard, compatible with both the RS Bahia and Vago (Formerly the Laser Bahia and Laser Vago)

Metal gudgeon plates to suit the Laser Bahia and Vago sailing dinghies. Use the same part for the top and bottom gudgeons. Holds the rudder pintle on the transom.

Laser Vago and Bahia pivot bolt set to suit rudder. Rudder pivot bolt set suitable for the Bahia, Stratos & Vago NB – The wing nut may be of a different shape.

The Laser Gnav Strut suits the Laser Bahia and Vago sailboats and is constructed from aluminium tube with end fittings. It connects the mast hinge fitting to the boom slider below using two clevis pins (sold separately). Specifications Weight: 0.008...

The Laser Gnav Mast Fitting connects the hinges on the strut to the mast with the drop nose pin included.

Auto Ratchet block 45 mm for the Laser Vago and Bahia sailboats. Ratchet blocks can come in manual or automatic versions. The manual requires a switch to turn the ratchet on and off. The auto ratchet blocks let the line run freely until it's put under...

The Laser Drop Nose Pin is used for the Picos, Vagos and Bahias - Suits the Mast Gate Claw Pin for the Laser Pico and the gooseneck connection for the Laser Vago/Bahia Mast.

The Pico Toe Strap plate is used to spread the load when attaching toe strap or MK1/MK2 Laser friction pad. Specifications Material: Plastic Colour: Blue