Laser

Laser Bahia lower shroud wire and rope to suit the Laser Bahia Masts. Comes supplied with crimped eye to connect to deck (shackle not included). Specifications Weight: 0.09 kg Dimensions: 15...

The replacement eyelet for the deck of the Laser Bahia or the bow of the Dart 16, screw in the Bow eye. Specification Weight (kg): 0,030  

This infused GRP centerboard is a multi-boat centerboard, compatible with both the RS Bahia and Vago (Formerly the Laser Bahia and Laser Vago)

Replacement Inspection Port for the Laser Bahia and Laser Bug. This inspection hatch cover comes in white and has two parts: the base, which you fix to the deck, and the top lid, which screws into...

Metal gudgeon plates to suit the Laser Bahia and Vago sailing dinghies. Use the same part for the top and bottom gudgeons. Holds the rudder pintle on the transom.

Laser Vago and Bahia pivot bolt set to suit rudder. Rudder pivot bolt set suitable for the Bahia, Stratos & Vago NB – The wing nut may be of a different shape.

Laser Performance Bahia Mast Shroud - Single Features Single shroud wire only Use a retaining bung to lock the shroud

The Laser Gnav Strut suits the Laser Bahia and Vago sailboats and is constructed from aluminium tube with end fittings. It connects the mast hinge fitting to the boom slider below using two clevis...

Gnav slider runs on top of boom, connects to the gnav strut and carry's out the same function as a kicker or vang ( Selden 511-805-01)

The Laser Gnav Mast Fitting connects the hinges on the strut to the mast with the drop nose pin included.

Plastic replacement Bhaia mast heel. This part is also known as the 'Laser Bahia Mast Foot', not to be confused with the Laser Bahia Mast Step.

The Laser Bahia Mast Step holds the mast when it is positioned upright. Bahia mast step aluminium construction, riveted to the cross beam, used to pin the mast foot to the cross beam.

RS Bahia Gennaker Pole (Formerly Laser Bahia) -Genuine Bahia Parts Specifications Weight: 1 kg Dimension: 120 × 5 × 4 cm

The replacement sheave to suit the mast head on all Laser and Bahia sailing boats. The Laser Sheave is made from nylon plastic and fits onto the top of the mast with a clevis pin 3/16" x 1" (sold...

Auto Ratchet block 45 mm for the Laser Vago and Bahia sailboats. Ratchet blocks can come in manual or automatic versions. The manual requires a switch to turn the ratchet on and off. The auto ratchet...

The modern Laser Bug or Pico Tiller Extension 710 mm with flexible attachment joint included. For a full Laser Tiller and rudder, see code LS-8513.  Specification Length: 710 mm

The Laser Tiller without extension for the Bug and Pico Sailboats comes with a cleat and attachment fitting to connect the flexible joint from the tiller extension. Suits Laser Pico and Laser Bug...

The Laser Pico has a simple downhaul system equipped with a self-releasing cleat for when you run a ground.

The official replacement Laser Rudder Head with aluminum tiller for the Laser Pico or Bug Sailboats is supplied without the rudder, tiller, or tiller extension. For a full rudder with tiller...

The replacement Laser Pico Bug Rudder Blade attaches to the transom through the rudderhead. Made in aluminium with composite end plugs, top and bottom. Aluminium rudder blade for the Laser Bug and...

The Laser Gudgeon fits the Laser Pico and Funboat sail craft, constructed in stainless steel. The Laser Gudgeon bolts onto the transom to attach a rudder (sold separately and comes complete with a...

Replacement Rudder Retaining Clip for the Laser Pico range of sailboats. Fits on the gudgeon bracket on the transom of the dinghy to secure the rudder when in position. Specification Material:...

Talamex Drop Nosed Pins in AIS316 marine stainless steel in a variety of diameters and length.

The Laser Drop Nose Pin is used for the Picos, Vagos and Bahias - Suits the Mast Gate Claw Pin for the Laser Pico and the gooseneck connection for the Laser Vago/Bahia Mast.

The Laser 4" Hatch come with a the lid and surrounding housing. Constructed in white plastic suitable as a Laser Pico Hatch replacement. Specifications Material: Plastic Colour: White Diameter: 4"

Direct replacement for the Laser Bug and Pico Daggerboard, constructed from aluminium. Official Foil from Laser Sailboats. Comes with end plugs and a bottom. In recent years, the Laser Pico and Laser...

The official Laser Daggerboard Plate replacement fits Laser Pico's only. Made from black plastic, positioned above the shim, and holds the daggerboard in place. Mounted using 6 x screws (M5 X 2 mm)...

Laser Performance Pico Race Sail Batten Set.

RS Pico / Laser Pico  5.14 m² new design main sail blue and white panels made from Dacron Specifications Colour: Blue/White With a Sail Bag Weight: 2.1 kg Dimension: 80 × 27...

The Pico Mainsheet Ratchet Block is the direct replacement for the block on your Laser Pico.

The Mast Sleeve to suit the Laser Pico is fitted using 3/16" x 5/8" rivets (not included). The Pico Lower Mast Collar attaches to the mast and holds the boom in place. A rivet is used to hold...

The Laser Pico Gooseneck is the plastic  U-shaped fitting that attaches the mast to the boom while allowing it to swing freely. Comes with a U-shaped clamp and boom insert.  The Pico...

Clew Hook (Jib Hook) to suit Laser Pico sailing dinghy.

Replacement Pico Boom with cleat, outhaul, and boom block. Official Pico parts are constructed from aluminium. Specification Material: Aluminium

OEM supplied for the following Dinghies and Users Laser Pico Clamcleat for boom outhaul   The Clamcleat side entry CL218 fairlead allows ropes to be hooked in for cleating, yet easily...

The Laser Pico Vang Plate for the boom has two attachment holes (3/16" x 1/2" rivets sold separately) and a flat base.  For a full Laser Pico Vang kit, see code: LS-90507. Pico kicker vang boom...

Eye Plate to attach the vang system to the mast on the Laser Pico. The Vang Mast Plate features three attachment holes (3/16" x 1/2" rivets sold separately) and a curved base designed to fit the...

Laser Road Base Trailer for galvanized stacking style, launching trollies - Suits ILCA, Laser & Laser Pico sailboats. Includes the lightboard, cable, and plug fitting and  complies with...

This is one of the most popular launching trollies for Laser or ILCA Class Sailing Dinghies - Manufactured in galvanized steel, this trolley is robust and able to take a battering from multiple...

The 10" Road wheel for the Dart 16 road base. A must if you are doing a lot of towing. Specification Diameter: 10"