Laser

High quality, Hyde Laser Radial Sail approved for Laser Class Sailing - Not approved for ILCA but ideal for training or club racing, as it is full spec. racing sail  Features Full racing...

This ILCA 6 Laser Radial Sail is not ILCA class-compliant sail but is ideal for training while keeping your official sails in top condition for events. They are made of the same cloth and to the same...

Stainless steel kicking strap plate for Standard, Radial and 4.7 lower mast attached with rivets. Not included. Specifications Material: Stainless steel Fasteners 4.8mm x 12.8mm Stainless Rivets

Holt Laser Pico Lower Mast, all fittings included - This is a high-quality replica product This metal Laser Pico lower mast section is the perfect fit for your Laser Pico sailing dinghy. The Pico...

Nautos Autobailer to suit all model Laser and ILCA sailing dinghies, comes as a complete swop-out assembly with fixing screw Features Slide down chute with 'O rings' Screw and plastic insert...

Laser Bahia / Vago mast jib sheave box with nylon pulley 90623 - (Selden 505-071-01 )

Laser Pico Stacking Launching Trolley - This is one of the most popular launching trolleys for Laser Pico. Built in galvanised steel, it quickly connects to the Laser Pico Road Trailer and is also...

The Laser Kicker Vang Upper Block comes with a curved kicker key that slides into a slot on the boom. This is the club version, which is perfect for training and practice. The block is also suitable...

The Laser Outhaul Primary Dyneema Line 4mm x 1.5m is used to fasten the sail to the boom while controlling the shape and curve of the sail. It runs from the clew hook to the fairlead at the end of...

Original plastic construction plain bearing block - fitted to boom with 91537 eye strap and attached with rivets.

Original plastic construction plain bearing block - fitted to boom with 91537 eye strap and attached with rivets.

Aluminium Funboat tiller with red handle - fitted with universal joint

Laser Bailer Bands that are supplied in a pack of four. Having trouble with the Bailer flap lifting back up? Take the bailer off the boat, give it a good clean, and check that the two bands are still...

Laser Performance Covers: are made with Marchem Vista fabric, which is strong, durable, and resists water, mildew, UV and tears- arguably the highest quality marine fabric available. are sewn...

The Laser Pico Combo Bag. Features Pico Combo Foil Bag suitable for rudder, centreboard, tiller, and ropes

Laser Pico tiller extension made from aluminium with a length of 880mm, complete with UJ fitting and rubber non-slip covering. This tiller extension clips onto the tiller arm through a universal...

Laser Pico tiller with fork and polyflex strop.

A rudder ring is a must if you would like to keep your Rudder. It provides a secondary attachment of the rudder to the hull preventing detachment. Make sure you have a rudder ring fitted to save you...

Replacement straps for an aluminium or wood Sunfish tiller.

Long rudder pin to attach rudder head to gudgeons. Specifications Weight: 1.086 kg Dimension: 28 × 16 × 10 cm

Laser Pico rudder strop complete with polyflex spring piece. Laser Pico polyflex strop pulls the Laser Pico tiller down and locks the rudder blade. After a couple of years, the tension in the...

Laser Cockpit Drain 92184 - This Laser Drain Bush Set sits at the rear of the cockpit and creates the opening for the self-bailer control rod to operate through. When replacing this item, be sure to...

12" IRL Sail Letters are designed for racing dinghies more than 3.5m long. This item only includes the individual letters: order 1 x I, 1 x R and 1 x L for a full sail markings set.Boats racing under...

Replacement Laser 42 Rudder Blade without stock or tiller and made from GRP.

Replacement centreboard/daggerboard foil for Laser 42 sailing dinghy. Made from GRP- Designed especially for the Laser 42.

Sunfish sail ring pack of 3 Laser Bailer Bands that are supplied in a pack of four. Having trouble with the Bailer flap lifting back up? Take the bailer off the boat, give it a good clean, and...

The Bug Yellow Zest Race Mainsail is a popular upgrade from the standard Bug Mainsail and when bought alongside the unique Bug Powercurve Race Mast, converts the Bug into the ideal learn to race boat...

The Laser Vago Mast 89007 is a fully rigged mast complete with all fittings, halyards, standing rigging wires, and spreaders. Please note this item is not held in stock and comes with a lead...

Replacement Mast for the Laser Vago sailing dinghy without rigging included. Fully rigged mast complete with all fittings, halyards, standing rigging wires, and spreaders Please note this item is not...

The Laser Vago Standard 7.56 m² rolled main sail with white panels and reefing points made from Dacron including long sail bag. Specifications Material: Dacron Panel colour: White...

Laser Performance Vago Boom - Fully Rigged.

Laser Performance Vago Gennaker Sock.

The Laser Vago Standard Gennaker 10.85 m² rip stop nylon in yellow including sail bag. Specifications Material: Nylon Colour: Yellow

Laser Selden Mast Step attached to the cross beam on your boat with 2 x rivets (sold separately). Connection bolt supplied for the Vago Mast. Features Attached to the main cross...

These combined swivelling deck fairlead and cam cleat assemblies are used for the jib sheet on both sides of the boat. Requires 3 x rivets for attachment (sold separately). For the replacement cleat...

The replacement Halyard Bag to suit the Laser Vago sailboats.

Vago rudder is supplied complete, ready to sail, including tiller extension, in stock at Sailcenter. Assembled, ready to sail, rudder head, tiller, rudder blade, and extension.

Laser Vago mainsheet is an 8 mm lightweight polypropylene main sheet. This mainsheet is used on the Laser Vago and Laser Bahia Laser Bahia and Vago mainsheet block assembly. Does not...

Trapeze Loop with block pulley for the Laser Bahia sailing dinghy.

Mesh gennaker sock in grey to cover and protect the gennaker on your Laser Bahia.