Mastervolt AGM Slimline Batteries – 12V

Mastervolt AGM Slimline batteries provide substantial battery capacity in an exceptionally narrow enclosure, making them an excellent choice for marine, mobile and off-grid installations where available floor space is limited.

The electrolyte is absorbed within a glass-fibre mat, creating a completely maintenance-free AGM battery. Under normal operating conditions, there is no gas formation, providing greater installation flexibility than conventional flooded lead-acid batteries.

Compressed AGM construction supports rapid discharge at high currents. This makes the Slimline range suitable for general service-battery applications as well as systems requiring high starting currents.

Compared with conventional battery formats, the Slimline design can save up to 15% in both volume and weight. Two 185Ah Slimline batteries can be installed within approximately the same footprint normally required by a single conventional 200Ah battery.

The batteries feature convenient removable M6 terminals and can be used with standard battery-terminal connections.

Information is based on the current Mastervolt AGM Slimline product range.

Key Features

• Exceptionally slim battery format
• Compressed AGM technology
• Completely maintenance-free
• No gas formation under normal operating conditions
• Suitable for service and starter applications
• Supports rapid, high-current discharge
• Saves up to 15% in volume
• Saves up to 15% in weight
• Removable M6 terminals
• Compatible with standard battery-terminal connections
• Two-year Mastervolt warranty
• Available in 150Ah and 185Ah capacities

Typical Applications

• Marine service battery banks
• Engine-starting systems
• Sailing yachts and motorboats
• Motorhomes and campervans
• Commercial and specialist vehicles
• Off-grid power systems
• Backup power installations
• Restricted battery compartments
• Installations with limited floor space

Starting Performance

The high-current performance makes these batteries suitable for applications requiring substantial discharge current, including certain engine-starting duties.

Installation Notes

• Select the correct AGM charging profile on the connected charger or inverter/charger.
• Do not exceed the specified maximum charging current.
• Secure the battery appropriately for the intended marine or vehicle installation.
• Protect battery cables with correctly rated overcurrent protection.
• Confirm polarity before making the final connection.
• Use correctly sized cables and suitable M6 terminal connections.
• Follow the Mastervolt installation instructions and applicable electrical regulations.

Details

Delivery Information

Delivery or Collection

A €75 pallet delivery surcharge applies when shipment is required. Available for delivery within Ireland only. Collection may also be selected where available.