null
Ireland EU online store
Owatrol

Owatrol Deks Olje D1 - Wood Saturating Oil - 1L

SKU:
85950
UPC:
3297971108317
£37.07

Description

Owatrol Deks Olje D1 is the special oil that saturates the wood, literally feeding it with oil to replace those lost. Driving out moisture and air, filling the woods pores with oil, it enriches and stabilises to provide lasting protection to interior and exterior timber. 

Features

  • Can be applied to both horizontal or vertical surfaces.
  • Saturates and protects all woods - Soft and Hard, Oily and Dense.
  • Excellent penetration - non-film forming.Replaces the natural oils lost from the wood - will not blacken the timber . 
  • Transparent - Enhances the woods natural grain.
  • Deep penetrating, stabilises the timber - Protects against moisture ingress
  • Easy maintenance - no sanding or stripping.
  • Used alone, gives a silken matt finish or overcoat with Deks Olje D2 for a high gloss finish

Where to use

  • Hardwoods and Tropical Timber : Oak, Chestnut, Teak, Mahogany, Movingui, Ipe, Bangkirai ...
  • Softwoods : Pine, Spruce, Larch ...
  • Exterior : garden furniture, patios, walkways, boat decks, topsides on boats, portals ...
  • Interior : flooring, paneling, stairs, doors, windows, door frames ...
  • Marine : Can be applied above or below the waterline. Excellent primer for conventional single pack marine coatings.
  • Horizontal - Vertical.

Directions of use

  • Apply a coat of D.1 with a brush or roller - Allow to penetrate for 15-30 minutes.
  • Apply a second application. Allow to penetrate for 15-30 minutes.
  • Repeat this procedure until the wood is saturated i.e. will accept no more oil.
  • Once the timber is saturated, always brush out or wipe up any excess product that has not penetrated to avoid shiny spots.
  • Do not allow D1 to become touch dry or dry between coats (apply "wet on wet").
  • Clean and brush wash with white spirits
  • Refer to the packaging for maintenance procedure.

 

picto_rendement Coverage rate for maintenance: 8 to 12 m²/l - Multicoat coverage: 1 to 4 m²/l
picto_temperature Application temperature: +5°C to +35°C
picto_temps Drying: 24 h. - Setting up time before use: 3 days
View AllClose