Boom and Mast

RS LaserPico mast gate assembly which includes claw and mast gate pin but screws sold seperately. Screws Required: 2 x M6 x 20 mm Cheesehead Screws 4 x M6 x 16 mm Cheesehead/Pan Screws

RS Pico, formerly Laser Pico aluminium upper mast complete. Specifications Material: Aluminium Shipping Notes Regret shipping with Northern and Souther Ireland only Due to lenght shipping surcharge  applied 

Holt Laser Pico Lower Mast all fittings included - This is a high quality replica product Specifications Tube material: Aluminium Length - 2.25m Diameter 7cm Weight - 4kgs.

The Clamcleat® CL211 Mk1 Racing Junior is a very strong alloy cleat with a fairlead to guide the rope into the teeth. The specially shaped base means the CL211 Mk1  means it can be fitted to either curved or flat surfaces The CL211 Mk1 has...

The Pico Mainsheet Ratchet Block is the direct replacement for the block on your Laser Pico.

The Mast Sleeve to suit the Laser Pico is fitted using 3/16" x 5/8" rivets (not included). The Pico Lower Mast Collar attaches to the mast and holds the boom in place, a rivet is used to hold the Pico Lower Mast Collar in Place. Specifications ...

Laser Pico Mast Gate Claw used as a mast gate latch to retain mast, secured with 90658 pin Specifications Material: Nylon Colour: White

Mast step plate, black plastic large hole to take mast foot, 4 holes to bolt it to the hull. Specifications Material: Plastic Colour: Black

The Laser Pico Gooseneck is the plastic u shaped fitting that attaches the mast to the boom while allowing it swing freely. Comes with U shaped clamp and boom insert. The Pico Gooseneck attaches the boom to the mast via a simple clipping in process.

Clew Hook (Jib Hook) to suit Laser Pico sailing dinghy.

RS Pico webbing loop to fit Pico Boom with stainless rivet  

Replacement Pico Boom with cleat, outhaul and boom block. Official Pico parts constructed from aluminium. Specifications Material: Aluminium

Clamcleat for outhaul adjustment on Laser Pico Boom - Retrofits with Clamcleat CL217 Mk1  Features Fits Laser Pico Material: Silver Aluminium Rope size: 3 mm - 6 mm Retrofits with CL217 Mk1 Fasteners Sowester A4 Stainless Rivets 4.8mm x 16mm ...

The Laser Pico Vang Plate for the boom has two attachment holes (3/16" x 1/2" rivets sold seperately) and a flat base. For a full Laser Pico Vang kit see code: LS-90507. Pico kicker vang boom plate. Specifications Material: Stainless...

Eye Plate to attach the vang system the mast on the Laser Pico. The Vang Mast Plate comes with 3 attachment holes (3/16" x 1/2" rivets sold seperately) and a curved base to fit the Pico Mast. Specifications Material: Stainless steel

Genuine RS Pico, formerly Laser Pico, lower mast. Aluminium with all fittings included. Specifications Tube material: Aluminium Length - 2.25m Diameter 7cm Weight - 4kgs.

Top mast collar black plastic fixed with rivets (sold separately). Suitable for Laser 1 and Laser Pico Masts. Specifications Material: Plastic Colour: Black

Laser Performance Pico/Funboat Upper Mast Base Plug black plastic fits on the bottom of the top mast fixed with 2 x rivets (sold separately). Specifications Material: Plastic Colour: Black

Plug black plastic fits on the top of the top mast fixed with rivets x 2 (sold seperately).Can also be used as Laser Pico Top Mast Plug. Specifications Material: Plastic Colour: Black

The Laser Boom Fairlead in blue plastic to tie the clew hook to the boom. Also used for traveller or boom outhaul. Features Fitting requires rivets 3/16" x 3/4" (sold seperately) Also used for clew outhaul fairlead on laser...