Through Hull Fittings

Plastimo high quality, reinforced nylon thru hull skin fittings with polished stainless outer flange and ribbed hose tail. Made from glass reinforced (20 %) polyamide with over moulded 316 L stainless steel flange. These skin fittings give are very...

Plastimo high quality, reinforced  nylon thru hull skin fittings with polished stainless outer flange and ribbed hose tail. Made from glass reinforced (20 %) polyamide with over moulded 316 L stainless steel flange. These skin fittings give are...

Plastimo high quality, compact nylon thru hull skin fittings with ribbed hose tails. For above waterline use on boats. Features  Available sizes 20mm (3/4"), 25m (1") & 38mm (1 1/2") UV resistant Always bed /seal a thru-hull with suitable...

Plastimo high quality, White 90° elbow vent. Dimensions A: 16-19 mm C: 68 mm D: 43 mm B: 41 mm E: 40 mm F: 59 mm

Plastimo high quality, compact nylon thru hull skin fittings with ribbed hose tails. For above waterline use on boats. Features  Available sizes 20mm (3/4"), 25m (1") & 38mm (1 1/2") Allows major room saving, as they can be used with a hose...

Maestrini heavy duty,  fully threaded, thru-hull skin fittings in gunmetal bronze, Alloy CB491K. These are commercial grade skin-fittings with extra length to cover heavier thickness hulls. Sizes 1" BSP 1 1/4" BSP 1 1/2" BSP 2"...

Nuova Rade Self Drain Socket for Inflatable Boats - 68mm Thru-Hull with non-return valve on outboard end. Specifications Nuova Rade Product Number: 43242 Material: PA Colour: Black outlet: Non-return Dimensions C: 107mm E: 94mm H:115mm ØA:...

Maestrini CR Brass Skin Fitting (Max Hull Thickness 40mm). Manufactured in CW602N alloy: a dezincification resistant brass considered equal to bronze in marine corrosion resistance and durability. Products made in this alloy are clearly stamped 'CR'...

Corrosion Resistant Brass Skinfitting with Hose Tail. Manufactured in CW602N alloy: a dezincification resistant brass considered equal to bronze in marine corrosion resistance and durability. Products made in this alloy are clearly stamped 'CR'.

The KM fittings below are moulded in off white Nylon, a strong, stable material unaffected by extreme temperature. Select sizes from: 12mm (1/2"), 19mm (3/4", 25mm (1") and 38mm (1 1/2"). Specifications 12mm Hosetail: 1/2" thread BSP 19mm Hosetail: 1"...

High quality marine grade CR brass skinfitting - Grate protects against debris intake. Manufactured in CW602N alloy, a dezincification resistant brass considered equal to bronze in marine corrosion resistance and durability. Features Threaded BSP CR...

The half grate skinfitting will protect against debris intake and also assist in forcing water inwards, as the vessel gains speed. Manufactured in CW602N alloy, a dezincification resistant brass considered equal to bronze in marine corrosion...