PUMPS & PLUMBING

Jabsco seat and lid replacement for regular bowl toilets only.     For the 29120-5xxx manual toilet, 37010-4xxx, 37045-4xxx, 37245-4xxxx series electric toilets. For the 58xx0-1xxx and -2xxx series Deluxe Flush electric toilets. 

Robust Diaphragm Waste Pump passes solids and is particularly effective in emptying holding tanks. The multi-positional pump head offers a variety of installation options. Features Quiet running Flexible installation Corrosion-resistant parts Handles...

Robust Diaphragm Waste Pump passes solids and is particularly effective in emptying holding tanks. The multi-positional pump head offers a variety of installation options. Features Quiet running Flexible installation Corrosion-resistant parts Handles...

Small Pulsation Dampener (small) for the following Jabsco Pumps. Specification Suits: Jabsco Belt Drive Water Pressure Pumps

SOLENOID/ANTI-SYPHON VALVE 12V.   Solenoid valve for use with Quiet Flush fresh water toilets Inline, normally closed solenoid valve. Features Supplied with 15mm (1/2”) JG Speed fit connections, 15mm (1/2”) hose barb inlet, 19mm...

Description The Jabsco Stainless Steel Accumulator Tank can hold 24 litres of cold water for use with showers and other outlets. It reduces strain on the plumbing system by holding water and then expelling it when needed. Features Reduces pressure on...

Jabsco now offers wakeboard and ski boat water ballasting pumps. These pumps can deliver almost 80 lb (10 gallons) of water ballast per minute. Features Self-priming and non-airlocking Bronze body, stainless steel shaft Reversible to both fill and empty...

Water Pressure Regulators protect your boat’s water system from damaging pressures of unregulated city water hook-ups. Features Maintains regulated pressure at various flow rates Flush model has unique swivel elbow output Manufactured of food-grade...

Jabsco Electro Magnetic 1 1/2" Clutch Pumps 12 V Pulley Double 'A' - Flanged Ports 2-size, foot-mounted with flanged ports 12 V DC electric clutch with 2A pulley. Features Heavy duty bilge and deck wash pump BSP threaded port adapters available Bronze...

Jabsco 1" Bronze Clutch Pumps are powerful engine-driven units. These tough and fully-serviceable belt-driven pumps will self-prime rapidly and work continuously over a wide engine speed range. Installed in innumerable fishing boats and other workboats...

Jabsco 1" bronze pump, 80-size, foot mounted with BSP threaded ports 12 V DC electric clutch with 2A pulley. (See related products for replacement impeller). The Jabsco Jabsco 1" Magnetic Clutch Pumps can output 82 LPM and is suitable as a heavy duty...

Jabsco 1" bronze pump, 80-size, foot mounted with BSP threaded ports 24 V DC electric clutch with 2A pulley. (See related products for replacement impeller). The Jabsco Jabsco 1" Magnetic Clutch Pumps can output 82 LPM and is suitable as a heavy duty...

Jabsco 1" bronze pump, 80-size, foot mounted with BSP threaded ports 12 V DC electric clutch with 1B pulley. (See related products for replacement impeller). The Jabsco Jabsco 1" Magnetic Clutch Pumps can output 82 LPM and is suitable as a heavy duty...

Neoprene Standard impeller material used in most flexible impeller pumps. It offers a wide range of chemical resistant properties. Specifications Impeller material: Neoprene Insert material: Bronze Number of blades: 8 Diameter: 2 9/16" (65.1 mm)...

Neoprene Standard impeller material used in most flexible impeller pumps. It offers a wide range of chemical resistant properties Specifications Impeller material: Neoprene Insert material: Brass Drive type: Flat Drive size: 2 Number of blades: 6...

Neoprene Standard impeller material used in most flexible impeller pumps. It offers a wide range of chemical resistant properties. Specifications Impeller material: Neoprene Insert material: Brass Drive type: Single Flat Drive size: 4 Number of...

Nitrile Recommended for a wide range of oils, oil and water emulsions, diesel fuel, lower fraction hydrocarbons, kerosene, lubricating and machine cutting oil. Specifications Impeller material: Nitrile Insert material: Brass Temperature range: 50...

Neoprene Use for oil/water transfer Specifications Impeller material: Neoprene Insert material: Bronze Drive type: Ding drive keyway Number of blades: 6 Diameter: 2" (51 mm) Width: 7/8" (22.2 mm) Shaft diameter: 1/4" (12.7 mm) Note: BR Brass Extended...

Jabsco Electro Magnetic 2" Clutch Pumps available in 12 V with a double pulley. 2" bronze pump, 270-size, foot mounted with BSP threaded ports. The Jabsco Jabsco 2" Magnetic Clutch Pumps can output 300 litres per minute and is suitable as a heavy duty...

Electro Magnetic 2" Clutch Pumps 24 V - Single Pulley with Flanged Ports 27-size, foot mounted with 2" flanged ports 24 V DC electric clutch with 1B pulley. Features Bilge and deck wash pump Bronze body, stainless steel shaft Can handle moderate amounts...

Jabsco Electro Magnetic 2'' Clutch Pumps available in 12 V with a single pulley. 2" bronze pump, 270-size, foot mounted with BSP threaded ports. The Jabsco Jabsco 2" Magnetic Clutch Pumps can output 300 litres per minute and is suitable as a heavy duty...

Specifications Impeller material: Nitrile Insert material: Brass Drive type: Slotted shaft pin Drive size: 1 or 2 Number of blades: 6 Diameter: 1 9/16" (40 mm) Width: 3/4" (19 mm) Shaft diameter: 3/8" (10 mm) Suits Engines Yanmar - 1GM10 Compatible...

Nitrile Recommended for a wide range of oils, oil and water emulsions, diesel fuel, lower fraction hydrocarbons, kerosene, lubricating and machine cutting oil. Specifications Impeller material: Nitrile Drive type: Key Temperature range: 50...

Heavy-duty 220 V AC general utility pump for dockside pump-out duties. Features Built-in dry running protection for 30 minutes after initial prime Handles hard and soft solids without clogging Neoprene impeller version available Will handle hard or soft...

Heavy-duty 220 V AC general utility pump for dockside pump-out duties. Features Built-in dry running protection for 30 minutes after initial prime Handles hard and soft solids without clogging Nitrile oil-resistant impeller fitted as standard Will...

Nitrile Recommended for a wide range of oils, oil and water emulsions, diesel fuel, lower fraction hydrocarbons, kerosene, lubricating and machine cutting oil. Specifications Impeller material: Nitrile Insert material: Brass Drive type: Ding drive...

The 6050 Series Pumps are the highest capacity self-priming portable utility pumps offered by Jabsco. Features Bronze pump head Convenient carrying handle Continuous duty motor with thermal overload protection Motor wired to operate with 115 V...

Genuine Jabsco 8713-0005 replaceable impeller in food quality neoprene, commonly used in milk and dairy pumps.  Specifications Impeller material: Food Quality Neoprene Drive type: Double flat Number of blades: 13 Diameter: 135 mm Width: 1 1/4" (32...

Viton Recommended when pumping hydrocarbons, solvents and severely corrosive chemicals. Specifications Impeller material: Viton Insert material: Plastic epoxy Drive type: Double flat Temperature range: 60 degree F (15.6 degree C) to 180 degree F (82.2...

Nitrile Use for diesel transfer Specifications Impeller material: Nitrile Insert material: Brass Drive type: Spline Drive size: 7 Number of blades: 8 Diameter: 2 9/16" (65 mm) Width: 2" (51 mm) Shaft diameter: 5/8" (16 mm) Replaces CEF # 500206

Description The Jabsco Bronze Engine Cooling Pump Model 29470-2351 is a high-quality, self-priming pump designed for marine engine cooling systems. Built to withstand the harsh marine environment, this pump ensures efficient cooling to maintain optimal...

Jabsco Handle Socket Fulcrum, Outer Clamping Ring, 2 x Diaphram Discs and fittings to suit Jabsco Amazon Universal Manual Pump 29270-0000.

Jabsco single 'B' pulley for the Jabsco Clutch Pumps. Suitable For 12V and 24V versions 50080, 50200 and 50270 series

Jabsco offers boaters several washdown pumps at ideal flow and pressure for washdown. Washdown pumps are ideal for cleaning decks, cockpits and anchors on yachts of a range of sizes and can be connected to sea or fresh water. The Quick Release Connector...

The Do-It-Yourself Oil Changer is simple to use, and offers quick and easy oil changes for the leisure boat owner. Features Fully assembled Tested for 1400 cycles Specifications Container volume: 13 L (14 quart) Dipstick hose: 8' (2.49 m) DC voltage:...

Jabsco electric toilet with regular sized vitrous china bowl, with 12v motor at the back for a tidy appearance and push button operation for ease of use. Jabsco toilets can be used on inland waterways, rivers, lakes or the sea, and can be installed above...

This design makes installation of electric toilets both affordable and practical. Boatbuilders find it easier to offer the option of electric or manual toilets to their customers. Boat owners appreciate modern design and the safety of a unit that can be...

This design makes installation of electric toilets both affordable and practical. Boatbuilders find it easier to offer the option of electric or manual toilets to their customers. Boat owners appreciate modern design and the safety of a unit that can be...

Jabsco Flexible Impeller Pumps for commercial duty are fitted with proven quality mechanical seals, providing long life under exacting conditions. Bearings are spaced to allow higher speeds, without jeopardizing life, and the open design allows debris to...

The self-priming flexible impeller pump is the industry recognized technology standard for leisure and work boat engine cooling. Being an original Jabsco, you are assured the highest grade bronze and stainless steels are used in keeping your engine at...