Electric Pumps

This sliding vane disel transfer pump pumps 35LPM 12 V suitable for pumping diesel designed for marine with integral switch and fuse fitted. ISO8836 marine (ignition protected). Features Light duty, 40 minute rated diesel fuel transfer pump Aluminium...

The Jabsco 50 litre Diesel Refuelling Pump in 24 V power supply with a switch and fuse included. Jabsco Sliding Vane Fuel Pumps are designed for refuelling medium sized diesel powered vehicles, plant, aircraft and boats with typical tank sizes of 200 -...

The Jabsco 50 litre Diesel Refuelling Pump in 12 V power supply with a switch and fuse included. Jabsco Sliding Vane Fuel Pumps are designed for refuelling medium sized diesel powered vehicles, plant, aircraft and boats with typical tank sizes of 200 -...

The Jabsco Utility Puppy Self-Priming Pump 3000 12V (25A) is for heavy duty, continously rated applications. With a new pump body design that allows for extended run dry periods, this continuously rated heavy-duty Utility Puppy 3000 offers very high flow...

Features High capacity, continuously rated bilge pump Simple, fully serviceable design with few wearing parts Bronze body, stainless steel shaft ISO 8846 MARINE (Ignition Protection) ISO 8849 MARINE (Bilge Pump Standard) Specifications Flow output: 11...

Features Lip type shaft seal Non-rusting bronze body Continuously rated electric motor Simple, fully serviceable design with few wearing parts Built-in dry-running protection for up to 10 minutes after initial prime Specifications Flow output: 7 GPM...

One of Jabsco most universal pumps and ideal as a medium duty, continuously rated bilge or deckwash pump. Also suits many land based operations. High-flow, continuously rated bilge pump offering good discharge head. Features Bronze body, stainless steel...

One of Jabsco most universal pumps and ideal as a medium duty, continuously rated bilge or deckwash pump. Also suits many land based operations. High-flow, continuously rated bilge pump offering good discharge head. Features Bronze body, stainless steel...

Jabsco Amazon Warrior pump with 38mm hose outlet. The Jabsco Amazon Warrior bulkhead/deck mounted manual pump has a flow rate up to 135 LPM with ports to suit 38 mm ID hose. Made from robust alloy and featuring twin diaphragms the Jabsco Amazon Warrior...

Robust and reliable bilge or general purpose hand pump manufactured in powder coated alloy. Features Up 85ltr per min out put Takes 38mm hose

Gusher Titan is Whale’s tough lightweight proven pump. A design that has been tried tested and trusted by sailors for decades.Whale's high performance lightweight model. It is important to ensure that a vented anti-siphon loop is incorporated...

Since the 1940s Whale engineers have refined our manual bilge pump designs and completed extended life testing - the result? Whale's iconic manual bilge pump range. Manufactured by hand using high grade materials and drawing on more than 60 years...

The Flexible Impeller Removal Tool is the easiest way to remove impellers, especially when the pump is mounted in tight and cramped conditions. Features Removes the risk of expensive damage to the pump Simple, three stage operation easily removes the...

The Flexible Impeller Removal Tool is the easiest way to remove impellers, especially when the pump is mounted in tight and cramped conditions. Features Removes the risk of expensive damage to the pump Simple, three stage operation easily removes the...

Nitrile Use for diesel transfer Specifications Impeller material: Nitrile Insert material: Brass Drive type: Spline Drive size: 7 Number of blades: 8 Diameter: 2 9/16" (65 mm) Width: 2" (51 mm) Shaft diameter: 5/8" (16 mm) Replaces CEF # 500206

A robust single diaphragm design pump with run dry capability. Suitable for bilge pumping, shower or sink drain applications and many other uses. Features Flexible installation Compact and simple design No strainer required Filter-less Quiet...

The Jabsco HotShot Heavy Duty range is the latest product release from Jabsco with improved reliability and performance, this HD4 12 volt model is a robust, high-flow, high-pressure diaphragm pump delivering 15.5 lpm at a powerful 60psi. Includes a...

The Jabsco HotShot Heavy Duty range is the latest product release from Jabsco with improved reliability and performance, this HD4 24 volt model is a robust, high-flow, high-pressure diaphragm pump delivering 15.5 lpm at a powerful 60psi. Includes a...

The Jabsco HotShot Heavy Duty range is the latest product release from Jabsco with improved reliability and performance, this HD4 12 volt model is a robust, high-flow, high-pressure diaphragm pump delivering 15.5 lpm at a powerful 60psi. Includes a...

The Jabsco HotShot HD5 is a powerful 12v 70psi washdown pump that will provide years of clean decks and satisfaction in the form of this robust and reliable high-flow and high-pressure diaphragm pump.  Jabsco HD (Heavy Duty) models include a wider...

The Jabsco HotShot HD6 is a powerful 12v 70psi washdown pump that will provide years of clean decks and satisfaction in the form of this robust and reliable high-flow and high-pressure diaphragm pump.  Jabsco HD (Heavy Duty) models include a wider...

SOLENOID/ANTI-SYPHON VALVE 12V.   Solenoid valve for use with Quiet Flush fresh water toilets Inline, normally closed solenoid valve. Features Supplied with 15mm (1/2”) JG Speed fit connections, 15mm (1/2”) hose barb inlet, 19mm...

The Jabsco HotShot HD6 is a powerful 24v 70psi washdown pump that will provide years of clean decks and satisfaction in the form of this robust and reliable high-flow and high-pressure diaphragm pump.  Jabsco HD (Heavy Duty) models include a wider...