RS Ocean Play Boats & Parts

Harken Carbo Ratchet Blocks allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Harken 57 mm Blocks feature Cam-Lock or U-Lock locking systems to lock the shackle in front or side positions, or swivel to...

RS Pico 1.09 m² rolled job in blue and white made from Dacron, including sail bag. Specifications Colour: Blue Weight: 1.5 kg Dimensions: 60 × 20 × 20 cm

The RS Pico Slot Strip for the underside of the daggerboard plate and housing. It is a flexible lip that allows the centreboard to be passed through the deck but stops water from rushing back into the cockpit. It keeps the daggerboard casing closed so...

The Pico Mainsheet Ratchet Block is the direct replacement for the block on your Laser Pico.

Complete rudder pintle and gudgeon assembly for Fusion Sailboat and also Laser Pico  

The modern Laser Bug or Pico Tiller Extension 710 mm with flexible attachment joint included. For a full Laser Tiller and rudder, see code LS-8513.  Specification Length: 710 mm

Ready to go Pico sailing dinghy rope pack, including main sheet, jib sheet, and all other control lines Lines included Application Length/mtr Type Jib Halyard 5 8 Plait P/S (Blue/Black) Mainsheet 10 Marstrand (Blue/Green) Jib Sheet 6 Marstrand...

Laser Pico rudder strop complete with polyflex spring piece. Laser Pico polyflex strop pulls the Laser Pico tiller down and locks the rudder blade. After a couple of years, the tension in the polyflex strop gets less and needs to be replaced...

Laser Pico tiller extension made from aluminium with a length of 880mm, complete with UJ fitting and rubber non-slip covering. This tiller extension clips onto the tiller arm through a universal joint.

Aluminium tiller extension complete with UJ and rubber nonslip covering. Specifications Material: Aluminium Length: 1067 mm

Optiparts manufactures a 32 mm aluminium tiller for the Laser dinghy. The tiller has at the outer end a precise molded anodized aluminium insert. The inner end is sealed with a plastic cap. The tiller comes in a Deluxe and a Standard version. The...

Replacement straps for an aluminium or wood Sunfish tiller.

The official Laser Daggerboard Plate replacement fits Laser Pico's only. Made from black plastic, positioned above the shim, and holds the daggerboard in place. Mounted using 6 x screws (M5 X 2 mm) sold separately. Specifications Material:...

The Laser Drop Nose Pin is used for the Picos, Vagos and Bahias - Suits the Mast Gate Claw Pin for the Laser Pico and the gooseneck connection for the Laser Vago/Bahia Mast.

The Laser Pico has a simple downhaul system equipped with a self-releasing cleat for when you run a ground.

Laser Cockpit Drain 92184 - This Laser Drain Bush Set sits at the rear of the cockpit and creates the opening for the self-bailer control rod to operate through. When replacing this item, be sure to bed it with Sikaflex 291. The drain bushing assembly...

Laser Performance Pico Race Sail Batten Set.

Clew Hook (Jib Hook) to suit Laser Pico sailing dinghy.

High quality HOLT padded centre toestrap to suit RS Pico and Laser Pico. Replaces Laser Performance part no 83112 This is the longer of the Laser Pico padded hiking straps which is fitted to the middle of the boat for the helm. The holes at each end of...

The Laser Lower Vang Block is used for the Laser Pico and Laser Standard rig sailboats on the top section of the Vang which attaches to the eye plate on the boom.Comes with removable pin to attach to eye plate (eye plate LS-91532 sold...

Medium to heavy weather Laser Pico Mainsheet made from Rooster Polilite Specifications Diameter: 7mm Length: 10m Rooster Polilite Since being used to win the Laser Gold Medal at the Sydney Olympics in 2000, Rooster's 7mm revolutionary non-twist...

ILCA approved, stainless steel gooseneck for ILCA 4, 6 & 7 sailboats - This gooseneck also suits Laser Performance models in Standard, Radial, and 4.7 rigs Specifications Material: Stainless steel Fasteners 6 x M4.8 x 12mm Stainless Steel Rivets -...

Long rudder pin to attach rudder head to gudgeons. Specifications Weight: 1.086 kg Dimension: 28 × 16 × 10 cm

Mast step plate, black plastic, with a large hole to take the mast foot, and 4 holes to bolt it to the hull. Specifications Material: Plastic Colour: Black

The Laser XD rudder head pivot bolt is an upgraded, large-diameter bolt and nylock nut with 20 mm washers. The rudder bolt will hold your rudder blade firmly in place.

Upper Rudder Gudgeon for RS Laser Pico, RS Laser, and Fusion Dinghy Rudders, complete with backing plate, locking clip, and retaining circlip on lanyard

Transom drainage flaps for RS laser Pico. This transom flap is for the later Picos with the flap recessed into the transom. Made of a translucent flexible plastic, they are held in place by Transom Flap Plates, code 91573. Specification Size: 9cm x...

High performance Harken boom end, mainsheet block with becket for all rigs ILCA or Laser Dinghies. The boom block with becket is attached to the aft end of the ILCA boom. Pass your mainsheet through the block, down to the traveler block, and back up to...

The MK1 flat back rubber friction pad for the deck of any Laser dinghy designed as a friction plate to keep the Laser daggerboard in place during sailing.

Lower Rudder Gudgeon for RS Laser Pico, RS Laser and Fusion Dinghy Rudders, complete with backing plate,

Top mast collar black plastic fixed with rivets (sold separately). Suitable for Laser 1 and Laser Pico Masts. Specifications Material: Plastic Colour: Black

Plug black plastic fits on the top of the mast, fixed with rivets x 2 (sold separately). It can also be used as a Laser Pico Top Mast Plug. Specifications Material: Plastic Colour: Black

Ocean Play Pico Daggerboard Rear Buff A composite-shaped buffer that fits into the stern end of the daggerboard casing to protect the hull against any daggerboard impact force, should you strike a rock or object

ILCA Laser Traveller Line, made from Marlow Excel Dyneema D12 SK78, the high strength gives the confidence to hike the traveller down hard. Features Low friction Lightweight Low water absorption Superb low stretch for ultimate tension on the...

The two pieces can be assembled around existing trapeze wires. So there is no need to replace the entire wire in case a handle fails. Specifications Handle type: Trapeze Number of pieces: 2

Large original traveller plain bearing block, plastic construction, uses englefield clips or sometimes called kissing clips to connect to the traveller block. Specifications Material: Plastic Colour: Blue Size: Large

RS Pico webbing loop to fit Pico Boom with stainless rivet.  

The Laser 4" Hatch come with a the lid and surrounding housing. Constructed in white plastic suitable as a Laser Pico Hatch replacement. Specifications Material: Plastic Colour: White Diameter: 4"

Original plastic construction plain bearing block - fitted to boom with 91537 eye strap and attached with rivets.

Original plastic construction plain bearing block - fitted to boom with 91537 eye strap and attached with rivets.