RS Ocean Play

Our Laser Vago training jib sails are made from a hard-wearing ripstop racing Dacron material, 5.2oz weight. Our training jibs are white and come with all of the reinforcement you would expect...

Rudder Stock with Tiller to suit RS Ocean Play Vago - Also suits earlier Laser Vago models. Specification Dimension: 40 × 40 × 15 cm  

Ready to go Pico sailing dinghy rope pack, including main sheet, jib sheet, and all other control lines Lines included Application Length/mtr Type Jib Halyard 5 8 Plait P/S...

Bahia Rudder Head Assembly with tiller Part No BAH-FO-300 It also suits Laser Bahia 85331 Bahia rudder head assembly is supplied without a rudder blade and without a tiller extension

The RS Bahia Gennaker standard sail is 12.78 m² with red panels, made from rip-stop nylon and including a sail bag. Specifications Colour: Blue Size: 12.78 m²

RS Laser Pico top protective cover ( Formerly Laser Pico)

RS LaserPico mast gate assembly, which includes the claw and mast gate pin, but the screws are sold separately. Complete mast gate fully assembled ready to bolt in place, includes claw but not...

The RS Ocean Play Pico, formerly the Laser Pico, is the perfect boat for training centres, club sailing and families, it can be sailed Pico double or single-handed with either mainsail only or jib...

RS Pico, formerly Laser Pico, aluminium upper mast complete. Specification Material: Aluminium Shipping Notes This product can only be shipped within Ireland. We have applied a shipping surcharge...

Genuine RS Pico, formerly Laser Pico, lower mast. Aluminium with all fittings included. Specifications Tube material: Aluminium Length: 2.25m Diameter: 7cm Weight: 4kgs

Fully rigged Bahia mast complete with all fittings, halyards, standing rigging wires, and spreaders. Please note that the Shipping Restriction map applies to this product due to its...

Ready to go Pico sailing dinghy vang pack including Selden ball bearing cam fiddle block, 2 x single blocks and all lines. Lines 2.3m x 6mm Multi Plait Polyester 1.0m x 6mm Multi Plait...

Bahia rudder blade in GRP - Suits RS Ocean Play Bahias and also recent Laser Performance Bahia models.  

Ocean Play Pico Daggerboard Rear Buff A composite-shaped buffer that fits into the stern end of the daggerboard casing to protect the hull against any daggerboard impact force, should you strike a...

Transom drainage flaps for RS laser Pico. This transom flap is for the later Picos with the flap recessed into the transom. Made of a translucent flexible plastic, they are held in place by Transom...

Plastic mounting plate to attach drainage flaps on RS Pico and Bahia Sail Boats - formerly Laser Pico and Bahia The transom flap fixing secures on top of the transom flap to hold it in place on your...

Lower Rudder Gudgeon for RS Laser Pico, RS Laser and Fusion Dinghy Rudders, complete with backing plate,

Upper Rudder Gudgeon for RS Laser Pico, RS Laser, and Fusion Dinghy Rudders, complete with backing plate, locking clip, and retaining circlip on lanyard

The RS Laser Vago 9.31 m² rolled mainsail with clear visor panels in Mylar, including a long sail bag. Specification Size: 9.31 m²

Genuine RS Laser Vago Gennaker Sails - Standard model VAG-SA-300 including Sail Bag The Laser Vago race gennaker/kite is the sail at the front of the boat to be used when going downwind and reaching...

Replacement Jib Halyard for the RS Laser Bahia sailing dinghy with wire halyard and rope tail. Genuine Bahia Spares Laser Bahia jib halyard complete with wire halyard and rope.

The trapeze kit for the Laser Bahia has two handles, two cleats, and two trapeze lines made from stainless steel wire. Optional trapeze pack for racing. Bahia trapeze kit for your Bahia, which...

Laser Pico / Bug and Fusion Rudder Assembly with Blade, Head, Tiller & Tiller Extension Specification Material: Aluminium

Genuine RS Laser Pico Toe Straps with padding both sides. Fitted in three positions on an RS Laser Pico: Two either side of the main hiking strap and the third in the crew forward position. Sold...

The RS Pico Slot Strip for the underside of the daggerboard plate and housing. It is a flexible lip that allows the centreboard to be passed through the deck but stops water from rushing back into...

RS Pico 1.09 m² rolled job in blue and white made from Dacron, including sail bag. Specifications Colour: Blue Weight: 1.5 kg Dimensions: 60 × 20 × 20 cm

Mast step plate, black plastic, with a large hole to take the mast foot, and 4 holes to bolt it to the hull. Specifications Material: Plastic Colour: Black

RS Pico webbing loop to fit Pico Boom with stainless rivet.