Laser Parts ( See also ILCA Parts)
The manufacture and supply of the world famous Laser Class is now split into two distinctly different groups. There is the Laser Class with its original logo and the new International Laser Class Association Laser, the ILCA Class, which is the only approved boat for ILCA Class governed events these include Provincial and National Championships and as well as the world Olympics. The Laser Class manufactured by Laser Performance, although now not officially monitored by ILCA, remains the identical boat and is perfect for Club sailing and now has its own Championships. CH Marine now supplies Laser Class Boats from Laser Performance and ILCA Laser Boats from Element 6 and Ovingtons. Parts are mostly interchangeable but certain ILCA approved parts are required for compliance in ILCA events. Confused? Dont worry, please just call us and we will be glad to advise
-
Laser Vago/Bahia/L2000 Centreboard Pivot Plate
Laser Performance
Current Stock: 2€14.95The Laser Centreboard Pivot Plate suits the Vago/Bahia/L2000 sailing dinghies and is made from stainless steel. Features Secures the daggerboard in place Suits the Laser Vago, Bahia or L2000 Specifications Material: Stainless steel Laser part no:...LS-85097€14.95 -
Rooster ILCA - Laser- RS Feva Clew Strap - 50mm
Rooster
Current Stock: 48€14.95The ultimate clew tie down for ILCA and Laser Sail Boats, as well a RS FevasThe strap holds the clew tightly in place using velcro and through clever design it is easy fitted and yet still slips nicely along the boom.ROOSTER-100621€14.95 -
Laser Mid Boom Mainsheet Block - Optiparts
Optiparts
Current Stock: 6€13.95Optiparts EX2150 mid boom mainsheet block for Laser and ILCA all models - Schools or Club version Fitting Instructions Drill out old rivets to remove the boom eye and replace using 4.8mm x 12mm Stainless RivotsOPEX2150€13.95 -
ILCA Laser Centreboard ( Daggerboard) Stop Set by Holt
ILCA
Current Stock: 26€12.95ILCA Laser Centreboard Stop Set by Holt How to assemble Allign the first cap fitting to the centre shaft and push down hard to until the shaft is flush with outer side of cap Fit the part assembled unit to the centreboard and then align and...HT70201€12.95 -
ILCA Laser Lower Vang Tang - Official
Laser
Current Stock: 2€10.95Stainless steel kicking strap plate for Standard, Radial and 4.7 lower mast attached with rivets. Not nlcuded Specifications Material: Stainless steel Fasteners 4.8mm x 12.8mm Stainless RivetsILC4923€10.95 -
ILCA Laser Boom Gooseneck End Plug
Laser
Current Stock: 5€10.95ILCA Laser Boom Plug - Inboard end to fit boom to lower mast via gooseneck fitting. Use a 12mm x Specifications Material: PlasticILC4930€10.95 -
ILCA Laser Secondary Outhaul / Vang Line 4mm x 4.95m
Laser
Current Stock: 10€10.00Laser Outhaul Control Line Pre-cut 4 mm x 4.8 m made from high quality Marlow Excel Control. Features Precision control and release Smooth cover giving low friction through the sheaves Firm construction allows precise grip in the jam cleat Durable...LSM-30010€10.00 -
Holt Monel Metal Rivets 1/4X1/2 (3 Pack)
Holt
Current Stock: 1€9.95Holt Marine Pre Packs - Monel Metal Pop Rivets Monel is is resistant to corrosion and acids so will not rust Ideal for fixing fittings on masts and booms A rivet gun will be required for fixing rivetsHA389€9.95 -
ILCA Laser Daggerboard Stop Sets
ILCA
Current Stock: 2€9.95ILCA Laser Centreboard or Daggerboard Stops - These push-together sets prevent the Daggerboard dropping too low How to assemble Allign the first cap fitting to the centre shaft and push down hard to until the shaft is flush with outer side of...ILC3916€9.95 -
ILCA Laser Outhaul / Vang Secondary Line 4mm x 4.95m
ILCA
Current Stock: 4€9.95This ILCA Laser Outhaul / Vang secondary line is made from 4mm Marlow Excel Control rope and provides excellent strength, flexiiblity and strength. Ready to go and cut to the required length of 4.95 mts, Usage Use as Secondary Vang Line for all rigs in...LSM-30011€9.95 -
ILCA Aluminium Traveler Fairlead Eyes - ILC416
ILCA
Current Stock: 23€8.95ILCA deck mounted fairlead for traveller system. Fits ILCA 7,6 & 4 and Laser standard, radial & 4.7.ILC5912€8.95 -
ILCA Laser Rudder Mega Bolt
Laser
Current Stock: 14€8.95The ILCA Mega Bolt is the pivot bolt to fit the Rudder Head to the Rudders Plade - Supplied with 20mm WashersILC3924€8.95 -
Optiparts Boom Attachment Vang Bracket for Laser
Optiparts
Current Stock: 2€8.95Laser vang bracket for boom attachment, provides the attachment point for the boom vang key.OPEX2134€8.95 -
Optiparts Bottom Mast Plug for Laser
Optiparts
Current Stock: 15€8.95Optiparts Bottom Mast Plug for Laser replacing the mast plug in your boat.OPEX2120€8.95 -
Optiparts Inner Boom End Plug for Laser
Optiparts
Current Stock: 2€8.95Optiparts Inner Boom End Plug for Laser.OPEX2128€8.95 -
Optiparts Upper Mast and Boom End Plug for Laser
Optiparts
Current Stock: 2€8.95Features Top plug for Laser upper mast and end plug for outer boom end Replacement part for Laser sailing and sailing schoolsOPEX2124€8.95 -
Optiparts Upper Mast Sleeve for Laser
Optiparts
Current Stock: 3€8.95Optiparts Upper Mast Sleeve for Laser.OPEX2126€8.95 -
Rooster Laser Mast Teflon Disc
Rooster
Current Stock: 26€8.95Just a small teflon disc to drop into the mast hole, soft enough to help absorb any grit. Take it out regularly to clean off the grit. Helps to prevent wear to the boat. Specifications Disc diameter 60mm Suitable for classes Laser Thickness 1mmROOSTER-100649€8.95 -
RWO Screw Bung & Socket & Seal - Pack of 2
RWO
Current Stock: 6€8.00RWO screw-in black drain bung and socket - Suits Laser and many other sailing dinghies Dimensions Aperture 17mm Cut out 22mmRWOR2066€8.00 -
RWO Screw-in Dinghy Bung - Pack of 2 Black
RWO
Current Stock: 53€8.00RWO R2067 screw-in black drain bung, suit fitting R2066 - Popular fit to many dinghies including Laser and ILCA Dimensions Aperture 17mmRWOR2067€8.00 -
RWO R0844 – XTEN Omniflex Tiller Joint - Suits ILCA Laser
Laser
Current Stock: 104€7.95High quality, reliable RWO OmniflexTiller Joint to suit most dinghy tiller extension, including ILCA Laser, Topper, and many others. This Omniflex joint is made from Elastomeric polymer which allows all directional flexability. The fitting includes a...RWO0844€7.95 -
ILCA Laser Lower Mast Base Plug - Fits ILCA 4 &7, Laser 4.7 & Full Rig
ILCA
Current Stock: 6€6.95Lower mast, base plug to suit ILCA 4 & 7 and Laser 4.7 and Full Rig Sail boats -Includes grooved feature to prevent sand entrapment and wear on you boat. Important Fixed in place with 4.8mm countersunk head rivet - It is important to use a...ILC4926€6.95 -
Holt Laser Rudder Retaining Pin with Cord 70141
Holt
Current Stock: 6€6.95ILCA or Laser tiller retaining pin to secure the tiller to the rudder head, supplied with securing cord Note If your tiller is not drilled to receive the retaining pin, ensure the tiller is firmly pressed into the head before drilling the location hole...HT70141€6.95 -
ILCA Laser Bow Eye Fairlead - ILC5910
ILCA
Current Stock: 2€6.95Standard Bow eye fairlead for all Laser and ILCA rig sail boatsILC5910€6.95 -
ILCA Laser Lower Mast Bottom Plug - ILCA 6, Laser Radial and Pico Only
ILCA
Current Stock: 9€6.95Lower mast, base plug used on the ILCA6, Laser Radial, Funboat and Pico lower mast, includes grooved feature to prevent sand entrapment and wear on you boat. Important Fixed in place with 4.8mm countersunk head rivet - It is important to use a...ILC4626€6.95 -
ILCA Laser Rudder Gudgeon
ILCA
Current Stock: 13€6.95Genuine ILCA Rudder Gudgeon asteners 4 x Sowester Pan Head Self Tappers per Gudgeon - Size 8 x 1 1/2" Select size hereILC5950€6.95 -
ILCA Laser Downhaul Secondary Line - 2.95m
ILCA Laser
Current Stock:€6.00Standard length ILCA Laser XD Secondary Line Downhaul made from Marlow Excel Control Line giving perfect control with low stretch and smooth tension and release movements. For 6:1 system. Features Smooth cover giving low friction through the...LSM-30008€6.00 -
Holt Laser Rudder Gudgeon - Suits all Rigs
Holt
Current Stock: 12€5.95Laser Rudders Gudgeons by Holt - 2 Required per boat Fasteners 2 x Sowester Pan Head Self Tappers per Gudgeon - Size 8 x 1 1/2" Select size hereHT911201€5.95 -
RWO Bayonet Dinghy Drain Bung - Pack of 2 White
RWO
Current Stock: 9€5.60RWO 2064 bayonet style white drain replacement bung for R2060 Dimensions Aperture 17mm Cut out 22mmRWOR2064€5.60 -
ILCA Laser Dyneema SK78 Primary Line Blue 4mm x 1.3m Outhaul/Vang/Downhaul
Laser
Current Stock:€5.50Laser Primary Control Line in Marlow Excel D12 Dyneema SK78. Features High strength 12 Strand Easy to splice Low water absorption Superb low stretch for precision control Specifications Material: Dyneema Colour: Blue Pre-cut diameter: 4 mm Length: 1.3...LSM-30000€5.50 -
Launching Trolley Nylon Wheel Washers - Pack of 2
Laser
Current Stock: 58€5.00Sowester nylon launching trolley wheel washers suitable for Laser/ ILCA stacking trollies and others dollies or trailers with 25mm axle diameter - Pack of 2 Features Heavy Duty 27mm Inside diameter to suit 25mm axles 2 Washers required...SOW2327€5.00 -
ILCA / Laser Rudder Retaining Clip
ILCA
Current Stock: 7€4.95The ILCA Laser rudder retaining clip prevents the rudder popping up and becoming detached. The rudder clip is easy to fit but remember to use Sikaflex or similiar sealant to keep the hull watertight.ILC5954€4.95 -
Optiparts Trailer Spring Wheel Clip - Circular
Optiparts
Current Stock: 25€4.95Optiparts Circular Trailer Wheel Clip which fits most types of dinghy trailer. The pin goes on the outside of the wheel to keep it in place. Features Galvanized trolley spring clip for securing wheelsOPEX10791€4.95 -
Harken Stand Up Spring for Bullet Block Pair 097 - 19mm
Harken
Current Stock: 7€3.95Springs support blocks on padeyes, eyestraps, bases, and traveller cars, and prevent blocks from hitting the deck. Specifications Height (A): 1" (25 mm) Width (B): 3/4" (19 mm) Weight: 0.13 oz. (3.7 g)HK097€3.95 -
Holt Laser L1 Lower Mast Base Plug Blue
Holt
Current Stock: 3€3.95Description Replacement Holt Laser L1 Lower Mast Base Plug in Blue. Not suitable for racing events.HT7623€3.95 -
Holt Laser L1 Upper Mast Base Plug
Holt
Current Stock: 3€3.95Description The Holt Laser L1 Upper Mast Base Plug is a high-quality replacement part designed specifically for Laser and ILCA sailing dinghies. Crafted by Holt, a trusted name in marine hardware, this durable black plug fits securely into the bottom of...HT7621€3.95 -
Holt Laser L1 Upper Mast Sleeve & Rivets
Holt
Current Stock: 3€3.95Description The Holt Laser L1 Upper Mast Sleeve & Rivets kit is a high-quality replacement solution designed for Laser and ILCA sailing dinghies. This durable black sleeve fits seamlessly onto the base of the upper mast, ensuring a tight and secure...HT7622€3.95 -
ILCA Laser Rudder Retaining Pin
ILCA
Current Stock: 4€3.95This ILCA / Laser tiller retaining pin secures the tiller to the rudder head. Note If your tiller is not drilled to receive the retaining pin, ensure the tiller is firmlypressed into the head before drilling the location hole to ensure solid fitILC3925€3.95 -
Optiparts Drain Plug for Laser
Optiparts
Current Stock: 21€3.95Optiparts Drain Plug for Laser.OPEX2081€3.95 -
RWO Traveller Fairlead - Stainless Insert
RWO
Current Stock: 30€3.50RWO deck mounted, traveller fairlead with stainless steel insert Suits ILCA 4,6 & 7 and Laser 4.7, Radial & Standard. Features 10mm Aperture Hole centres 23mm Height 18mm High load bearing,acetal resin with stainless insertRWOR3246T€3.50