Cam Cleats & Accessories
Harken, Spinlock & Barton Cam Cleats or Jam Cleats, as they are sometimes known, for all manner of rope control. Choose between basic economy Jam Cleats to high performance Cleats with lead eyes and high load release. Cam cleats on this page include models swivel base and cams for main sheet control.
-
Harken Micro Wedge Kit 297
Harken
SEK81.39Wedge Kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 27 mm Fits cam: 468, 471 Length: 48 mm Width: 24 mm Weight: 5 gHK297SEK81.39 -
Harken Standard 15 Degree Angled Riser 296
Harken
SEK204.24Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/2" (38 mm) Fits cam: 150, 365 Height: 1 1/16" (27 mm) Length: 2...HK296SEK204.24 -
Harken Standard Flat Riser 295
Harken
SEK153.05Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/2" (38 mm) Fits cam: 150, 365 Height: 1" (24 mm) Length: 2 9/16"...HK295SEK153.05 -
Harken Micro 15 Degree Angled Cam Riser 294
Harken
SEK132.58Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/16" (27 mm) Fits cam: 468, 471 Height: 3/4" (19 mm) Length: 1 7/8"...HK294SEK132.58 -
Harken Micro Flat Cam Riser 293
Harken
SEK81.39Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/16" (27 mm) Fits cam: 468, 471 Height: 5/8" (16 mm) Length: 1 7/8"...HK293SEK81.39 -
Harken Offshore Wedge Kit 283
Harken
SEK112.10Wedge Kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 2 1/16" (52 mm) Fits cam: 280 Length: 3 3/8" (85 mm) Width: 1 1/2" (38...HK283SEK112.10 -
Harken Eye Strap for Micro Cam Pair 281
Harken
SEK71.15Specifications Fastener spacing: 1 1/16" (27 mm) Fits cam: 468, 471 Height above cam: 1/2" (12 mm) Length: 1 7/16" (36 mm) Width: 7/16" (11 mm) Weight: 0.16 oz. (4.5 g)HK281SEK71.15 -
Harken Bullseye Swivel Base Cam Cleat with Carbo-Cam 241
Harken
SEK1,197.30The 240 and 241 are simple swivel bases for main and jib sheets on very small boats or for control lines on boats of all sizes. Specifications Minimum line diameter: 1/8" (3 mm) Maximum line diameter: 3/8" (10 mm) Fastener spacing: 1 1/32" (26 mm)...HK241SEK1,197.30 -
Harken Bullseye Swivel Base Cam Cleat with 150 Cam-Matic 240
Harken
SEK1,330.39The 240 and 241 are simple swivel bases for main and jib sheets on very small boats or for control lines on boats of all sizes. Specifications Minimum line diameter: 1/8" (3 mm) Maximum line diameter: 1/2" (12 mm) Fastener spacing: 1 1/32" (26 mm)...HK240SEK1,330.39 -
Harken Little Ball Bearing Low-Profile Swivel Cam Base 205
Harken
SEK2,108.45Ball Bearing Swivel Bases feature dual rows of Delrin ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. The low profile 205 is used when installation is at...HK205SEK2,108.45 -
Harken Low-Profile Standard Eyestrap 201 - 38mm
Harken
SEK91.63Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads. Specifications Overall length (A): 1 7/8" (48 mm) Overall height (B): 3/8" (10 mm) Mounting hole spacing...HK201SEK91.63 -
Harken Cam-Matic Cleat Bastet Modified for Windward Sheeting Car 150SP
Harken
SEK780.11Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Specifications Minimum line diameter: 1/8" (3...HK150SPSEK780.11
