Cam Cleats & Accessories
Harken, Spinlock & Barton Cam Cleats or Jam Cleats, as they are sometimes known, for all manner of rope control. Choose between basic economy Jam Cleats to high performance Cleats with lead eyes and high load release. Cam cleats on this page include models swivel base and cams for main sheet control.
-
Harken Micro Wedge Kit 297
Harken
NOK92.76Wedge Kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 27 mm Fits cam: 468, 471 Length: 48 mm Width: 24 mm Weight: 5 gHK297NOK92.76 -
Harken Standard 15 Degree Angled Riser 296
Harken
NOK232.78Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/2" (38 mm) Fits cam: 150, 365 Height: 1 1/16" (27 mm) Length: 2...HK296NOK232.78 -
Harken Standard Flat Riser 295
Harken
NOK174.44Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/2" (38 mm) Fits cam: 150, 365 Height: 1" (24 mm) Length: 2 9/16"...HK295NOK174.44 -
Harken Micro 15 Degree Angled Cam Riser 294
Harken
NOK151.11Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/16" (27 mm) Fits cam: 468, 471 Height: 3/4" (19 mm) Length: 1 7/8"...HK294NOK151.11 -
Harken Micro Flat Cam Riser 293
Harken
NOK92.76Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/16" (27 mm) Fits cam: 468, 471 Height: 5/8" (16 mm) Length: 1 7/8"...HK293NOK92.76 -
Harken Offshore Wedge Kit 283
Harken
NOK127.77Wedge Kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 2 1/16" (52 mm) Fits cam: 280 Length: 3 3/8" (85 mm) Width: 1 1/2" (38...HK283NOK127.77 -
Harken Eye Strap for Micro Cam Pair 281
Harken
NOK81.10Specifications Fastener spacing: 1 1/16" (27 mm) Fits cam: 468, 471 Height above cam: 1/2" (12 mm) Length: 1 7/16" (36 mm) Width: 7/16" (11 mm) Weight: 0.16 oz. (4.5 g)HK281NOK81.10 -
Harken Bullseye Swivel Base Cam Cleat with Carbo-Cam 241
Harken
NOK1,364.62The 240 and 241 are simple swivel bases for main and jib sheets on very small boats or for control lines on boats of all sizes. Specifications Minimum line diameter: 1/8" (3 mm) Maximum line diameter: 3/8" (10 mm) Fastener spacing: 1 1/32" (26 mm)...HK241NOK1,364.62 -
Harken Bullseye Swivel Base Cam Cleat with 150 Cam-Matic 240
Harken
NOK1,516.31The 240 and 241 are simple swivel bases for main and jib sheets on very small boats or for control lines on boats of all sizes. Specifications Minimum line diameter: 1/8" (3 mm) Maximum line diameter: 1/2" (12 mm) Fastener spacing: 1 1/32" (26 mm)...HK240NOK1,516.31 -
Harken Little Ball Bearing Low-Profile Swivel Cam Base 205
Harken
NOK2,403.11Ball Bearing Swivel Bases feature dual rows of Delrin ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. The low profile 205 is used when installation is at...HK205NOK2,403.11 -
Harken Low-Profile Standard Eyestrap 201 - 38mm
Harken
NOK104.43Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads. Specifications Overall length (A): 1 7/8" (48 mm) Overall height (B): 3/8" (10 mm) Mounting hole spacing...HK201NOK104.43 -
Harken Cam-Matic Cleat Bastet Modified for Windward Sheeting Car 150SP
Harken
NOK889.13Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Specifications Minimum line diameter: 1/8" (3...HK150SPNOK889.13