null
Ireland EU online store

SAILBOATS & PARTS

SAILBOATS & PARTS

  • ILCA Laser Centreboard Stop Set 85236

    ILCA Laser Centreboard ( Daggerboard) Stop Set by Holt

    ILCA

    Current Stock: 5
    €12.95
    ILCA Laser Centreboard Stop Set by Holt How to assemble Align the first cap fitting to the centre shaft and push down hard to until the shaft is flush with outer side of cap  Fit the part assembled unit to the centreboard and then align and...
    HT70201
    €12.95
  • Holt Monel Metal Rivets 1/4X1/2

    Holt Monel Metal Rivets 1/4X1/2 (3 Pack)

    Holt

    Current Stock: 6
    €9.95
    Holt Marine Pre Packs - Monel Metal Pop Rivets Features Monel is resistant to corrosion and acids, so it will not rust Ideal for fixing fittings on masts and booms A rivet gun will be required for fixing rivets
    HA389
    €9.95
  • ILCA Laser Daggerboard Stop Sets

    ILCA Laser Daggerboard Stop Sets

    ILCA

    Current Stock: 8
    €9.95
    ILCA Laser Centreboard or Daggerboard Stops - These push-together sets prevent the Daggerboard dropping too low. How to assemble Align the first cap fitting to the centre shaft and push down hard to until the shaft is flush with outer side of...
    ILC3916
    €9.95
  • ILCA Laser Outhaul Vang  Secondary Line - 4.95m

    ILCA Laser Outhaul / Vang Secondary Line 4mm x 4.95m

    ILCA

    Current Stock: 0
    €9.95
    This ILCA Laser Outhaul / Vang secondary line is made from 4mm Marlow Excel Control rope and provides excellent strength, flexibility and strength. Ready to go and cut to the required length of 4.95 mts, Usages Use as Secondary Vang Line for all rigs in...
    LSM-30011
    €9.95
  • Holt Laser Rudder Retaining Pin with Cord 70141

    Holt Laser Rudder Retaining Pin with Cord 70141

    Holt

    Current Stock: 3
    €6.95
    ILCA or Laser tiller retaining pin to secure the tiller to the rudder head, supplied with securing cord Note If your tiller is not drilled to receive the retaining pin, ensure the tiller is firmly pressed into the head before drilling the location hole...
    HT70141
    €6.95
  • LCA Laser Bow Eye Fairlead

    ILCA Laser Bow Eye Fairlead - ILC5910

    ILCA

    Current Stock: 2
    €6.95
    Standard&nbsp Bow eye fairlead for all Laser and ILCA rig sail boats   Acetal open-based and bullseye rope fairleads with or without stainless steel liner. Features Fixing Hole Size: 5mm Dist. Between Fixing: 5mm Weight: 30g
    ILC5910
    €6.95
  • Laser Boom Block 40mm Eyestrap - 91537

    ILCA Laser Heavy Duty Eye Strap for Boom Blocks ILC318HD

    ILCA

    Current Stock: 7
    €6.95
    ILCA /Laser Boom Block Stainless Eye Strap  40mm Hole Centres For attaching both blocks to the ILCA / Laser booms Fasteners Use 2 x 4.8mm  x 12mm  Stainless Steel Rivets We recommend using Duralac between rivets and spars - This prevents...
    ILC4937
    €6.95
  • ILCA Rudder Gudgeon

    ILCA Laser Rudder Gudgeon

    ILCA

    Current Stock: 12
    €6.95
    Replacement gudgeon for the ILCA dinghy and Laser sailboat. Two of these are mounted on the transom of the boat and used for attaching the rudder head. Installs with 4 screws (not included). Sold individually and made from a heavy duty plastic for long...
    ILC5950
    €6.95
  • ILCA LaserRudder Retaining Clip ILC5954 ILCA LaserRudder Retaining Clip ILC5954

    ILCA / Laser Rudder Retaining Clip

    ILCA

    Current Stock: 8
    €4.95
    The ILCA Laser rudder retaining clip prevents the rudder popping up and becoming detached. The rudder clip is easy to fit but remember to use Sikaflex or similar sealant to keep the hull watertight. Features Will secure the rudder to the transom You can...
    ILC5954
    €4.95
  • Holt Laser L1 Lower Mast Base Plug Blue

    Holt Laser L1 Lower Mast Base Plug Blue

    Holt

    Current Stock: 3
    €3.95
    Replacement Holt Laser L1 Lower Mast Base Plug in Blue. Not suitable for racing events. Please Note These replica and training parts are replacements; they are not official parts bearing an official ® mark and therefore CANNOT BE USED in official...
    HT7623
    €3.95
  • Holt Laser L1 Upper Mast Sleeve & Rivets HT7622

    Holt Laser L1 Upper Mast Sleeve & Rivets

    Holt

    Current Stock: 3
    €3.95
    The Holt Laser L1 Upper Mast Sleeve & Rivets kit is a high-quality replacement solution designed for Laser and ILCA sailing dinghies. This durable black sleeve fits seamlessly onto the base of the upper mast, ensuring a tight and secure connection...
    HT7622
    €3.95
  • ILCA Laser Rudder Retaining Pin

    ILCA Laser Rudder Retaining Pin

    ILCA

    Current Stock: 17
    €3.95
    This ILCA / Laser tiller retaining pin secures the tiller to the rudder head. Note If your tiller is not drilled to receive the retaining pin, ensure the tiller is firmly pressed into the head before drilling the location hole to ensure solid fit.
    ILC3925
    €3.95
  • Holt Drain Sockets Captive Bung Black

    Holt Drain Sockets & Captive Bung Black

    Holt

    Current Stock: 0
    €2.30
    The Holt Allen Drain Sockets & Captive Bung in Black is a high-quality drainage solution designed for marine and boating applications. Crafted from durable, UV-resistant black plastic, this drain socket and captive bung combo ensures reliable...
    HA223
    €2.30

Laser boats & parts, sailing blocks & pulleys, dinghy parts, sails, spars, rigging and sailboat parts and equipment. CH Marine is the official Laser supplier for Ireland and Northern Ireland and we offer expert advice and service.