Fairleads & Eyes
A range for deck eyes, pad eyes, deck organisers, fairleads and bulls eye leads from Harken ,Barton and Spinlock. Used for a organising and guiding control lines around the deck to various control fittings such a cleats and clutches. Use the low friction range for altering angles of pull under high load
-
Karver KORG18-1 Deck Organizer
Karver Systems
Current Stock: 1€259.21The KORG18-1 is a low-friction die-cut fairlead with a single wide passage. It allows for supporting very heavy loads with a minimum weight. Features Block machined aluminum Hard anodization with Teflon to limit friction Light and...KARVER-PL781679€259.21 -
Karver KORG18-2 2 Eyed Deck Organizer
Karver Systems
Current Stock: 1€269.38The Karver KORG18-2 Deck Organizer is a low-friction fairlead cut with 2 passages of 18mm max line. It supports very heavy loads with a minimum weight. Features Block machined aluminum Hard anodization with Teflon to limit friction Light and compact 2...KARVER-PL781440€269.38 -
Karver KORG18-3 3 Eyed Deck Organizer
Karver Systems
Current Stock: 1€314.11The Karver KORG18-3 Deck Organizer is a low-friction fairlead cut with 3 passages of 18mm max line. It supports very heavy loads with minimal weight. Features Block machined aluminum Hard anodization with Teflon to limit friction Light and...KARVER-PL781043€314.11 -
Karver KORG18-4 4 Eyed Deck Organizer
Karver Systems
Current Stock: 1€405.59The Karver KORG18-4 Deck Organizer is a low-friction fairlead cut with 4 passages of 18mm max line. It supports very heavy loads with minimal weight. Features Block machined aluminum Hard anodization with Teflon to limit friction Light and...KARVER-PL781265€405.59 -
Barton Pad Eye 4mm - 60305
Barton
Current Stock: 3€11.95Barton 2-hole fixing Pad Eye manufactured from AISI 304 stainless steel. Featuring a solid stainless steel bar welded for extra security. Specifications Bar dia.: 4mm Height: 16mm Hole Centres: 30mm Weight: 18 g Dimensions: 45 × 15 × 21...B60305€11.95 -
Barton Double Folding Pad Eye - 60304
Barton
Current Stock: 1€54.95Barton 60304 double fold flat, pad eyes in stainless with dampener pads Specifications Eye Dia: 6mm Overall width: 51mm Overall Length: 100mm Weight: 95 g Dimensions: 98 × 52 × 9 mm Bore Diameter (mm): 6mm Fastenings: 6mm Height of deck when...B60304€54.95 -
Barton Pad Eye 8mm - 60307
Barton
Current Stock: 4€20.95Barton 2-hole fixing Pad Eye manufactured from AIS304 stainless steel. Featuring a solid stainless steel bar welded for extra security. Specifications Bar dia.: 8mm Height: 28mm Hole Centres: 55mm Width: 80mm Weight: 68 g Dimensions: 80 × 26...B60307€20.95 -
ILCA Aluminium Traveler Fairlead Eyes - ILC416
ILCA
Current Stock: 18€8.95ILCA deck-mounted fairlead for traveller system. Fits ILCA 7,6 & 4 and Laser standard, radial & 4.7. The advantage of the Laser aluminium traveler fairlead is that it doesn't break like the plastic one. The aluminium fairlead has the same hole...ILC5912€8.95 -
Sowester Stainless Pad Eyes 6mm Eye - 35mm x 40mm Plate
Sowester
Current Stock: 895€2.95Sowester 4-hole 316 stainless steel deck-plate with welded eye Dimension D A B H h W d mm mm mm mm mm mm mm 6 35 40 26 17 18 5.2SOW2115€2.95 -
Harken Reflex Staunchion Mount Fairlead Model 7355
Harken
Current Stock: 0€44.95Harken recommend equipping asymmetric/code zero furling systems with lead blocks for safe furling from the cockpit. These stanchion mounted leads guide furling line outboard to keep sidedecks clear. Specifications Weight (g) 123 g Maximum...HK7355€44.95 -
Harken Big Boat Jib 1.9 T High-Load Oval Fairlead C8154
Harken
Current Stock: 0€249.40Strong aluminum jib leads deflect jib sheets to winches, preventing overrides. Specifications Maximum line diameter: 7/8" (22 mm) Maximum working load: 4248 lb (1927 kg) Height: 2 9/32" (58 mm) Width: 4 3/4" (120 mm) Weight: 9.6 oz. (272 g)HKC8154€249.40 -
Harken Standard Cam-Matic Kit with X-Treme Angle Fairlead 459
Harken
Current Stock: 0€88.95The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degree to the cleat. Kit includes hardcoat-anodized 150 aluminum Cam-Matic and 375 X-Treme Angle Fairlead. Specifications Includes cam: 150 Includes fairlead:...HK459€88.95 -
Harken Standard Cam Fairlead 425
Harken
Current Stock: 14€9.95Lightweight, fiber-reinforced flairleads feature stainless wearguards for long life and are available in various colors for color-coding your cams. Specifications Fastener spacing: 1 1/2" (38 mm) Fits cam: 150, 365 Height above cam: 5/8" (16 mm) Length:...€9.95 -
Harken Micro Cam Fairlead 424
Harken
Current Stock: 20€8.95Lightweight, fiber-reinforced flair leads feature stainless steel wearguards for long life and are available in various colors for color-coding your cams. Specifications Fastener spacing: 1 1/16" (27 mm) Fits cam: 468, 471 Height above cam: 7/16" (11...€8.95 -
Harken Micro Fast Release Fairlead 495
Harken
Current Stock: 2€25.95The 494 and 495 Fast Release Fairleads feature low-friction, angled stainless steel line guides on the exit side of the cleat. The angled lead keeps the line away from the cam to eliminate unexpected recleats during maneuvers. Use for fast spinnaker...HK495€25.95 -
Harken Micro Wire Fairlead 475
Harken
Current Stock: 4€10.95Wire Fairleads maintain a low profile while holding the line close to the cleat. Specifications Fastener spacing: 1 1/16" (27 mm) Fits cam: 468, 471 Height: 15/16" (23 mm) Length: 1 7/8" (48 mm) Width: 15/16" (24 mm) Weight: 0.29 oz. (8 g) Technical...HK475€10.95 -
Harken Micro X-Treme Angled Fairlead 476
Harken
Current Stock: 0€25.95The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees to the cleat. This sets it apart from other fairleads, where the line unclamps at extreme angles and can’t recleat without centering the line...HK476€25.95 -
Harken Standard X-Treme Angle Fairlead for 150 and 365 Cam 375
Harken
Current Stock: 0€28.95The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degree to the cleat. This sets it apart from other fairleads where line uncleats at extreme angles and can’t recleat without centering the line. Specifications Maximum...HK375€28.95 -
Harken Bullseye Fairlead 339 - 19mm
Harken
Current Stock: 0€6.95Use the 237 and 339 where there is little deflection in the line such as when routing a spinnaker pole foreguy aft along the cabin house. Specifications Maximum line diameter: 1/4" (6 mm) Fastener spacing: 0.71" (18 mm) Fasteners: #8 RH inch (4 RH mm)...HK339€6.95 -
Harken Midrange Grand Prix Jib Lead Small Jib Fairlead 3280
Harken
Current Stock: 2€73.95Strong aluminum jib leads deflect jib sheets to winches, preventing overrides. These jib leads have two small drilled holes through which a loop can be spliced to attach the hobble. This temporarily secures the jib/genoa clew to free-up a winch for mark...HK3280€73.95 -
Harken Double Bolt-Down Fairlead 3278 - 16mm
Harken
Current Stock: 2€96.95Harken Bolt-Down Fairleads are used on boats 6-15 m (20-50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize line wear...HK3278€96.95 -
Harken Single Bolt-Down Fairlead 3277 - 16mm
Harken
Current Stock: 3€58.95Harken Bolt-Down Fairleads are used on boats 6-15 m (20-50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize line wear...HK3277€58.95 -
Harken Double Bolt-Down Fairlead 3275 - 12mm
Harken
Current Stock: 4€84.95Harken Bolt-Down Fairleads are used on boats 6-15 m (20-50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize line wear...HK3275€84.95 -
Harken Single Bolt-Down Fairlead 3274 - 12mm
Harken
Current Stock: 6€54.95Harken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize...HK3274€54.95 -
Wichard Forged Folding Pad Eyes - Sizes 6 , 8mm & 10mm
Wichard
Current Stock: 10€43.95 - €66.85Perfect solution for fastening applications, stays, blocks, jib tack point, lifelines, tether, etc. High-quality, drop forged stainless steel with outstanding work and break loads. They feature a modern and optimized design to suit the aesthetics of...€43.95 - €66.85 -
Harken Folding Pad eye 3207 - 6mm
Harken
Current Stock: 1€58.95Folding Padeyes keep your deck and passageways clear. They’re ready when you need to attach a snatch block or fender, but fold safely out of the way when you don’t. Specifications Maximum working load: 3080 lb (1400 kg) Breaking load: 6160...HK3207€58.95 -
Harken Bullseye Fairlead 237 - 38mm
Harken
Current Stock: 4€8.95Use the 237 and 339 where there is little deflection in the line, such as when routing a spinnaker pole foreguy aft along the cabin house. Specifications Maximum line diameter: 1" Fastener spacing: 1" (25.4 mm) Fasteners: #10 RH inch (5 RH mm) A: 1 1/4"...HK237€8.95 -
Spinlock BE12 Bulleye with Twin Fixing
Spinlock
Current Stock: 12€8.95For max 12mm lines. Features For guiding lines between two fixed points with little horizontal or vertical deflection Guides extra lines to the cockpit cleats and clutches when no organiser Sheaves are available Double screw fitting Stainless steel...SPINLOCKBE12/TF€8.95 -
Spinlock BE10 Bulleye with Twin Fixing
Spinlock
Current Stock: 8€6.95Features Versatile new solution for low-loaded lines, either fitted alone or for double stacking onto T25 Organizers Integral stainless eye construction Grouped format minimizes the deck space for multiple lines Shape deflects easily to fit concave or...SPINLOCKBE10/TF€6.95
