Scanstrut Mounts

The Scanstrut APT-150-01 is sleek and stylish Radome support which maximes the performance of your Radar. 150mm (6”) high and constructed from the best marine-grade aluminium, it is designed to fit...

Scanstrut Radar Mount LM-BF1 suits the 2Kw 4Kw Raymarine or Garmin radomes.Mounts forward of backstay for 2kW / 4kW Ray marine, Garmin and Navico BR24 / 3G / 4G radomes. Automatic Self-levelling...

Install GPS & VHF antennas above the radar for maximum visibility and performance using the Scanstrut Pole Mount SC111 The Scanstrut Pole Accessory is designed for the installation of GPS antenna and...

Scanstrut SC110 fits Perko 200, Aqua Signal 25 & 40 series lights for poles or antenna. They mount the navigation on the same Scanstrut mount as your radome to save space while positioning it higher...

Scanstrut Pole Mount SC101 1.9m1.9m (6.4') complete pole system for 2kW / 4kW Raymarine; Garmin and Navico BR24 / 3G / 4G radomes. 1.9m (recommended for deck mounting) for Raymarine, Simrad and...

Gantry mount for Aluminium / Stainless PowerTower. Only compatible as part of a radome installation. Features Mounts navigation / search lights and GPS / VHF antennas Pre-drilled to fit Aqua Signal...

For installation with Composite & Aluminium Power Tower. Angles your radar down 4° below horizontal and provides a level horizon for your radar when the boat is bow’s up underway. Features Fits...

To mount the following antennas:Radar: 2kW and 4kW Raymarine, Simrad or Garmin radomesRadar Height: 350mm / 14" high: greater clearance and increased radar horizonOffering a single monocoque...

To mount the following antennas:Radar: 2kW and 4kW Raymarine, Simrad or Garmin radomesRadar Height: 150mm / 6" high: ideal for clearance of smaller obstaclesThe Scanstrut PowerTower PT2004 is...

Scanstrut Dual PowerTower Satcom in 40cm to mount the following antennas:Radar: 2kW and 4kW Raymarine, Simrad or Garmin radomes OR open-array radarsSatcom/TV: any 40cm antenna Scanstrut’s Dual...

Scanstrut SC20 - The world's most popular Mast Mount for Radomes and SatCom Antenna. Manufactured from marine-grade aluminium and coated with Scanstrut's unique 4-step marine paint system, ensuring...

Scanstrut SPH-SYSTEM-W Instument Pod fits 8" display + 4 standard navigation displays or up to 12" displays and 2 standard instruments Designed for mounting your display and instruments together...

Scnstrut's SPD-4XI-W allows you to install your Instruments on virtually any flat surface on board. This allows you to have your instruments in the prime position while out sailing on your sailboat...