Starbrite Salt Off Protector Application Kit

Directions

To remove salt deposits from exterior marine surfaces, trailers, dive gear, fishing rods & reels

• Fill dispenser cup from the Salt Off applicator (94100) with Salt Off Concentrate
• Attach one end of applicator to a garden hose and the other end to a trigger-type watering nozzle
• Ensure black knob on the applicator is in the “On” position and the blue knob is in the “Mixture” position
• Thoroughly saturate all surfaces that need to be treated, allowing Salt Off to soak in for 5 to 10 minutes
• Stubborn deposits may require light brushing
• Rinse with fresh water and allow treated surfaces to air dry

To treat items by immersing

• Add 2 to 4 fl. oz. of Salt Off Concentrate per 1 gallon of fresh water
• Immerse item to be treated for several minutes, rinse with fresh water and allow to air dry

To flush inboard and outboard engines

• Fill Dispenser Cup with Salt Off Concentrate
• Attach one end of applicator to a garden hose and the other end to a flushing unit designed for your engine type
• Ensure black knob on the applicator is in the “On” position and the blue knob is in the “Water Only” position
• Run the engine to reach normal operating temperature
• Once operating temperature has been reached, turn off the engine and turn the blue knob to “mixture” and verify the solution is flowing
• Restart the engine and allow the engine to run until dispenser cup is clear, and the product has been used up
• Salt Off’s coating will protect the engine against future rust and corrosion