Stormsure Boot Shoe & Wader Repair Kit

The Stormsure Boot, Shoe & Wader Repair Kit offers a reliable, all-in-one solution for restoring waterproof footwear and waders exposed to tough outdoor conditions. Whether you’re dealing with splits, punctures or worn areas, this kit allows you to carry out strong, flexible repairs without the need for specialist equipment.

Features

• Designed for repairing boots, shoes and waders
• Produces waterproof, long-lasting repairs
• Flexible finish allows footwear to bend naturally
• Performs reliably in wet, muddy and marine environments
• Simple DIY application with no specialist tools required
• Compact kit for storage in vehicles, toolboxes or backpacks
• Suitable for both emergency fixes and permanent repairs

Specifications

• Product Type: Waterproof footwear & wader repair kit
• Repair System: Adhesive with reinforcement patches
• Adhesive Type: Stormsure® Flexible Repair Adhesive
• Adhesive Colour: Clear
• Water Resistance: Fully waterproof once cured
• Flexibility Level: High – suitable for moving and bending materials
• Compatible Materials: Rubber, PVC, neoprene, leather, fabric and synthetic uppers

Contents

• 5g tube of Stormsure® Flexible Repair Adhesive for durable, waterproof and flexible repairs
• Two TUFF Tape® round patches for quick fixes or backing holes before adhesive application
• Sandpaper for surface preparation and enhanced bonding performance

Directions

For instant repairs to punctures and splits on generally flat surfaces, clean the surface and apply a TUFF Tape patch or strip directly onto the damage. Rub with a smooth, hard object to ensure best adhesion and least air under the patch. 

For damage in awkward or hard to reach areas, clean the damaged area (sand for best results) and apply Stormsure Flexible Repair Adhesive directly onto the damage, leaving a 5mm excess overlapping around it. Leave flat and allow to cure for 10-12 hours.

Tips

Mix with Stormcure Accelerator to reduce cure time to approximately 1 hour. Ensure there is no air left in the tube before replacing cap. Store partly used tubes in a freezer.