Topper Parts

Topper Topaz Mainsheet Uno 7mm x 7 mtr in non-kinking Polilite Braided Rope Rooster Polilite Rope, with its revolutionary non-twist characteristics, is perfect for mainsheets. The load-bearing outer cover grips the lightweight inner core and helps to...

The Sowester Topaz Outhaul Braided Secondary Line 5mm is used in conjunction with the Rooster Topaz Elastic Outhaul Line 5mm. The two lines are connected by the hook on the end of the elastic. Features Polyester 8 braid from Marlow ropes Neater and...

The Sowester Topaz Outhaul Sheet, also known as a Cunningham sheet, is used to extend the sail across the boom and fasten it in place during sailing. The sail is attached to the line using a Rooster Topaz Clew Hook (sold separately). There are a few ways...

Improve your performance on the racecourse. Sail faster with the Topper Harken Race Kit. The Topper Harken Race Kit combines the long-lasting reliability of Harken hardware with quality FSE Robline rope for the Topper. The low-friction purchase systems...

Topper Gooseneck and Mast Collar (post March 2014) Combined package of the new gooseneck & collar for the mast. Complete with a 4mm rivet needed for the job.  

Rooster Topper Under Cover 1680D Polyester. Features Very high wearing, super tough material Our undercover has a deep bow section, so when traveling, the bow section can't lift off and flap around Deep-sided cover for extra protection, two-part clip...

RWO Centre Main Ratchet Block Kit for the Topper This is the hull part of the centre main kit. Look for a Centre Main Boom Kit to complete your system. Sailing Solutions Centre Main Ratchet Block Kit for the Topper - (Block make may...

Topper Topaz Mainsheet Uno 7mm x 7 mtr in non-kinking Polilite Braided Rope Rooster Polilite Rope, with its revolutionary non-twist characteristics, is perfect for mainsheets. The load-bearing outer cover grips the lightweight inner core and helps to...

Pre-cut length to suit the Topper Topaz Jib Sheet made from 8mm. Trem Doublebraid Sail Line. Designed in 8mm diameter to suit training needs of young sailors. Colour may vary from what it shown in the picture. Specifications Diameter: 8mm Length: 6...

The Harken 40mm Fiddle Block with Camcleat is the replacement for the Topper or Topaz Lower Kicker Block. Carbo fiddle line features high-load ball bearings with fitted races for low-friction operation. This kicker block is attached to the mast by an...

3:1 Topper Kicker to suit all models of Topper or Topaz sailing dinghies. Improve your performance on the racecourse. Sail faster with the Topper Harken Race Kit to suit the Topper and Topper Topaz boats. The Topper Harken Race Kit combines the...

Aluminium tiller extension in Spectro grey anodised material suitable for the Topper Topaz Sailing Dinghy, including models: Uno, Race and RaceX.Suitable as a Topper/Topaz Tiller Extension when using a centre sheeting system. Features Aluminium...

This foil bag carries the Laser® daggerboard and rudder in a snug zipped-up bag and has the added feature of a mesh pocket on the side to hold all your ropes. Also with a side pocket for your Rooster tiller & extension...

Replacement eyelet for the boom on a Topper Topaz Kicker Tang for the Topper Boom.This Rooster Topper Tang connects the boom to the upper kicker block. Fitted with rivets

Rooster Topper TZST19 Clew Hook fits all Topper and Topaz Sailing Dinghies. It is manufactured in marine-grade stainless steel and simplifies the rigging process by eliminating the clew strap on the tie line Installation You will need to remove the...

Rooster Topper Mainsheet 7mm for the new centre sheeting system made from Rooster Polilite. Does not suit Topaz dinghies. Rooster Polilite mainsheet for the new centre main system - 13m x 7mmAvailable in Blue, Black or Red with coloured fleck...

Dyneema is a registered trademark of DSM Dyneema. Does not suit the Topaz. Improve your performance on the racecourse. Sail faster with the Topper Harken Race Kit. The Topper Harken Race Kit combines the long-lasting reliability of Harken hardware with...

The ILCA Laser rudder retaining clip prevents the rudder popping up and becoming detached. The rudder clip is easy to fit but remember to use Sikaflex or similar sealant to keep the hull watertight. Features Will secure the rudder to the transom You can...

Ronstan Screw-in Drain Bung suits Topper and Topper Topaz Sailboats and many other dinghies. Manufacturer: Ronstan RF738 Features Water-tight seal Retaining legs Specifications Hole in transom size Ø 24.0 mm Hole screw centres 38mm Weight: 10...

Barton Single Block is suitable for the 2 x Topper Downhauls Blocks attached onto the carbine hook at the bottom of your downhaul. Topper or Topaz Downhaul Block with 20mm sheave for use as a micro block around smaller pleasure dinghies. Suits up to 5mm...

New style Barton Size 2 Fiddle, Cam Block with swivel shackle eye and Becket with cotter pin closure - Suitable for general purpose Dinghy Van Systems. Suits the Topper Topaz lower kicker block. The 35mm sheave Size 2 block range provides high...

Yacht Blocks - Max Dia Line 10mm - Sheave Dia 45mm. The Barton Size 3 (45mm) Fiddle Block w/ Swivel is a strong, lightweight range of blocks suitable for use on dinghies, dayboats, and cruising yachts, ideal for mainsheet, vang tackles, lead blocks, or...