Victron EasySolar-II GX

The Easy Solar-II GX combines an MPPT Solar Charge Controller, an inverter/charger and control hub in one enclosure. The product is easy to install, with a minimum of wiring. Choose your model above : (Volts/VA Output/Charger Amps - Max Pass Through Current)

The all-in-one solar power solution

The Victron Easy Solar-II GX integrates the following elements:

• A Multi Plus-II inverter/charger
• A Smart Solar MPPT -Tr solar charge controller
• A GX device with a 2 x 16-character display.

These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money.

Display and Wi-Fi

The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device. In addition, Wi-Fi can be used to set up the system and to change settings.

Solar charge controller

The DC output of the Smart Solar MPPT is parallel wired with the DC connection of the Multi Plus-II inverter/charger. The on/off mechanism of the Multi Plus-II also controls the Smart Solar MPPT.

GX device

The integrated GX device includes:

• A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE Can compatible port.
• A USB port
• An Ethernet port
• A VE Direct port

The GX device controls the Multi Plus-II and the Smart Solar MPPT with respectively a VE. Bus and a VE. Direct connection

Download

Victron Easy Solar-II GX Datasheet