Description
The VE.Direct to VE.CAN interface cable can be used to make BMV-700 information available on a VE.Can network. Where it can be read by a Color Control GX for example.
Limitations
- The interface cable does not work with other VE.Direct products, such as Solar Chargers, Inverters and also not with the BMV-712 Smart.
- When used in combination with a BMV-702 there is limited functionality with regards to the AUX function in the BMV: When used to measure starter battery voltage, that voltage will be transmitted to VE.Can. But when used to measure temperature and or mid-voltage, that data will not be transmitted on the VE.Can network.
Optional Extra
BMV-700H
BMV-700
BMV-702
BMV-702 (Black)
BMV-712 Smart
Technical File
Related Products
Related Products
Victron Energy VE.Bus to VE.Can Interface
Victron Energy
€185.95
Use a CANUSB. Note that, while performing the update, make sure that the solar charger is also switched on an connected to the same VE.Can network, in order to power the interface. Technical File...
VASS030520115
Victron Energy VE.Direct to USB Interface
Victron Energy
€36.95
The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct...
VASS030530010
Victron Energy VE.Direct to NMEA2000 Interface
Victron Energy
€296.45
This NMEA2000 drop cable makes the BMV-700 information available to an NMEA2000 networks. Battery information such as voltage, current and state of charge can be displayed on common purpose displays...
VASS030520310
Victron Energy VE.Direct to RS232 Interface
Victron Energy
€35.95
Victron Energy VE.Direct to RS232 Interface. Optional Extra BMV-700H BMV-700 BMV-702
VASS030520500
Victron Energy VE.Direct to Global Remote Interface
Victron Energy
€97.95
Victron Energy VE.Direct to Global Remote Interface. Technical File Declaration of Conformity
VASS030534000
