Wema Fuel Gauge - White Face 52mm

Analogue Wema Fuel Gauge for monitoring of tank level works with either S3 or S5 senders and come in European 0-190ohms.

Available in all white or black face to match the dash on your boat. You can also choose between stainless or white plastic bezel.

Please enquire for orders of the stainless steel bezel.

Features

• Fuel level
• 52mm diameter gauge
• 12v/24v
• Marine grade fuel tank gauge IP67 waterproof
• 0-190 ohms or 240-30 ohms
• Backlight in red or yellow

Fitting instructions

1. Cut a 52mm (2 1/16") diameter hole in the dash or panel -You will need a minimum clearance of 55mm (2 3/16") behind the panel to fit the Wema Fuel Gauge.
2. Remove fastening ring and insert gauge through panel from the front, fit and tighten fastening ring from the rear.
3. Connect wires as per Wema wiring diagram.
4. Select either Orange or Yellow wires for backlighting. Wire colour corresponds with backlight colour.
5. Insert wire harness into port at the back of the fuel gauge.