null
Ireland EU online store
West System

West System Pack A - 1.2kg

SKU:
36035
UPC:
5063369010566
€62.95
Frequently bought together:

Description

The West System Epoxy A Pack includes 1 kg of epoxy resin and 0.2kg of hardener in a handy DIY pack.

West System Epoxy is a versatile, moisture resistant, high-strength plastic which adheres to a wide range of materials including fibreglass and PVC. This makes it ideal for projects that require water and chemical resistance and strong physical properties for structural bonding.

West System 105 Epoxy Resin

West System 105 Epoxy Resin is the base material on which a 105 System epoxy compounds are built. The resin is a clear, pale yellow, low-viscosity liquid epoxy resin. Formulated for use with West System hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance.

105 Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odour, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cp) at 72 F (22C),

105 Resin is designed specifically to cover and bond with wood fibre, fiberglass, reinforcing fabrics and a variety of metals when mixed at the proper ratio with a West System hardener. An excellent adhesive, 105 mixtures will bridge gaps and fill voids when modified with West System fillers and can be sanded and shaped when cured. With roller applications, it has excellent thin-film characteristics to flow out and self-level without fish eyeing.105 Resin/207 Hardener mixtures cure clear so you can achieve a natural finish when coating with varnish.

West System 205 Hardener

205 Hardner is standard cure time hardner for larger projects or where a slower cure time is required, use 206 Hardner

Epoxy & Fillers Selection Guide

west-system-product-selection-chart.jpg


Coverage Guide

Estimating quantities is very important, but also quite tricky, due to the large differences of coverage depending on the thickness,

viscosity and room temperature at which it isapplied. The below is a guide for the resin without fillers, at the mid ranges.

coverage.jpg

Approvals 

All West System products are manufactured under a Quality Management System that conforms to BS EN ISO 9001:2000. As a result West System epoxy is a marine epoxy of the highest quality; to the extent that it has been approved by the Lloyds Register of Shipping for the last 20 years. 

Product safety

Please note the following hazard warnings:
Hazard pictogram(s):
Signal word: Warning
Hazard statement(s):

H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.<br/ >H411 Toxic to aquatic life with long lasting effects.

Precautionary statement(s):

Prevention
  • P261 Avoid breathing dust/fume/gas/mist/vapors/spray
  • P264 Wash hands thoroughly after handling.
  • P272 Contaminated work clothing should not be allowed out of the workplace.
  • P273 Avoid release to the environment.
  • P 280 Wear protective gloves/protective clothing/eye protection.
Response
  • P302 + P352 IF ON SKIN: Wash with plenty of soap and water
  • P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P333 + P313 If skin irritation or rash occurs: Get medical attention/advice.
  • P337 + P313 If eye irritation persists: Get medical attention/advice
  • P362 + P364 Take off contaminated clothing and wash it before re-use.
  • P391 Collect spillage.
Disposal

P501 Dispose of contents/container in accordance with local, regional and international regulations.


Ireland  Safety Data Sheet pdf

Ireland  Safety Data Sheet pdf

View AllClose