West System Epoxy Resin

The West System Epoxy A Pack includes 1 kg of epoxy resin and 0.2kg of hardener in a handy DIY pack. West System Epoxy is a versatile, moisture resistant, high-strength plastic which adheres to a wide range of materials including fibreglass and PVC. This...

West System 410 Microlight Filler is the ideal low-density filler for creating a light, easily-worked epoxy fairing compound especially suited for fairing large areas. Microlight mixes with epoxy with greater ease than 407 Low-Density filler or micro...

West System's Six10 Thickened Epoxy Adhesive combines the strength, reliability and excellent physical properties of a two-part WEST SYSTEM Epoxy with point-and-shoot convenience. The self-metering coaxial cartridge dispenses a gap-filling structural...

West System G/flex 650 is a toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than...

The West System G-flex Thickened Epoxy Adhesive 650 is a toughened, versatile, 2-part epoxy for permanent waterproof bonding of plastic, fiberglass, ceramics, metals, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, G/flex...

West System Cleaning Solvent 85 as supplied by Wessex Resins and Adhesives Limited.A specially blended cleaning solvent for removing uncured epoxy from tools, boat and workshop surfaces. Supplied in 1 litre size.

West System 207 Special Clear Hardener was developed for coating and fiberglass cloth application where an exceptionally clear, moisture-resistant, natural wood finish is desired. 207 Hardener will not blush or turn cloudy in humid conditions. Thin film...

West System 207 is a blush-free, special clear hardener for coating and fiberglass cloth application where an exceptionally clear, moisture-resistant, natural wood finish is desired. When used with 105 Epoxy Resin, 207 Hardener will not blush...

West System 410 Microlight Filler is the ideal low-density filler for creating a light, easily-worked epoxy fairing compound especially suited for fairing large areas. Microlight mixes with epoxy with greater ease than 407 Low-Density filler or...

West System 409 Microsphere Blend in 100 gram packs is a pure white, hollow glass bubble-based, low density filler designed for filling and fairing of fibreglass. When the filler is mixed with West System epoxy at a ratio of 10% to 25% by weight, it...

A blended filler used to make fairing putties which are easy to sand but still reasonably strong on a strength to weight basis. Add 20 to 40% by weight to West System epoxy mix. Cures to a dark reddish brown colour. All West System products are...

The West System 406 filler is a thickening additive suitable for bonding, gap filling and filleting. It can be used to prevent resin flow on vertical and overhead surfaces and to control the viscosity of the epoxy. It is often used in combination with...

The West System 405 Epoxy Filler is used in filleting applications when a natural finish interior is required. Alcohol or water based stains may be added to adjust the colour. Add 15% to 25 % by weight to the West System epoxy mix. Cures to a tan colour...

All West System products inclduing the 405 West System Filleting Blend are manufactured under a Quality Management System that conforms to BS EN ISO 9001:2000. As a result West System epoxy is a marine epoxy of the highest quality; to the extent that it...

As a rule, use higher-density fillers when bonding higher-density materials such as hardwoods and metals. Any of the adhesive fillers are suitable for most bonding situations. Your choice of a filler for general use may be based on the handling...

Specially designed for convenient and accurate dispensing of West System 105 Resin and 205 or 206 Hardeners. The pumps mount directly on the resin and hardener 'B' size containers and have been calibrated to deliver the correct working ratio of 5 parts...

Specially designed for convenient and accurate dispensing of West System 105 Resin and 205 or 206 Hardeners. The pumps mount directly on the resin and hardener 'A' size containers and have been calibrated to deliver the correct working ratio of 5 parts...

The West System G-Flex Kit 655-32 is a thickened, versatile epoxy that is conveniently pre-thickened for permanent waterproof bonding of plastic, fiberglass, ceramics, metals, and damp and difficult-to-bond woods. With a modulus of elasticity of...

The West System Epoxy B Pack includes 5 kg of 105 epoxy resin and 1kg of 205 hardener in a handy DIY pack. West System Epoxy is a versatile, moisture resistant, high-strength plastic which adheres to a wide range of materials including fibreglass and PVC...

The West System Mini Pack 101 is a handy DIY Kit containing 250ml of 105 Resin, 50ml of 205 Hardener and enough high-density filler to complete a variety of coating and bonding operations. West System Epoxy is a versatile, moisture resistant,...