Zinga Zingasolv Thinner & Solvent 1L

Zingasolv 1L is the recommended thinner and equipment cleaner for Zinga film galvanising and related Zinga coatings. It is a C9–C10 aromatic hydrocarbon solvent made for use with these products only.

Use it to thin Zinga for spray application and to rinse brushes, rollers and spray equipment before and after use. Zinga must be diluted with Zingasolv only. Do not substitute white spirit, universal thinner or other solvents.

Add Zingasolv while stirring. Start with the minimum dilution and increase only if needed. Higher dilution gives a smoother film and a thinner coat. Typical Zinga guidance is about 0–5% by weight for brush and roller, with higher rates for spray; follow the current Zinga technical data sheet for the method you are using.

Features

• Official thinner for Zinga, and also used with Zingalufer, Zingatarfree, Alu ZM and compatible topcoats in the range
• Suitable for thinning and for cleaning application equipment
  
  

Specifications

• Product type: aromatic hydrocarbon thinner and cleaner
• Composition: aromatics (>99% v/v), C9–C10
• Pack size: 1 L
• Appearance: clear
• Density: 0.876 kg/dm³ (±0.05) at 15°C
• Flash point: ≥40°C to <60°C
• Initial boiling point: minimum 164°C
• Dry point: maximum 185°C
• Shelf life: 36 months if stored correctly