Actisense NMEA 0183 to NMEA 2000 Gateway, with PC interface (USB connection)

The Actisense NGX-1-USB is an intelligent NMEA 2000 gateway and PC interface designed to provide safe, reliable communication between a vessel’s NMEA 2000 network and a USB-equipped computer.

It transfers NMEA 2000 data to and from compatible PC applications without altering the original network messages. This makes it suitable for navigation software, vessel monitoring, data recording, network diagnostics and the configuration of compatible Actisense products.

The NGX-1-USB can also operate as a conversion gateway, translating compatible NMEA 2000 data into NMEA 0183 format for use by PC applications. Its extensive conversion library supports a wide range of marine information, including compatible position, speed, heading, wind, depth, engine and AIS data.

Full galvanic isolation between the USB connection and NMEA 2000 network helps protect the computer and onboard electronics against ground loops and electrical faults.

The unit includes an integrated 1.8-metre USB Type-A cable and is powered directly from the NMEA 2000 network.

Key Features

• Connects an NMEA 2000 network to a computer via USB
• Integrated 1.8-metre USB Type-A cable
• Sends and receives NMEA 2000 network data
• Supports every available NMEA 2000 PGN for data transfer
• Converts compatible NMEA 2000 data for NMEA 0183 PC applications
• Extensive conversion library, including compatible AIS data
• Fully galvanically isolated USB interface
• Helps prevent dangerous ground loops
• Supports USB 1.1, 2.0 and 3.0
• Data rates from 4,800 to 230,400 baud
• Compatible with Actisense NMEA Reader
• Configurable through Actisense Toolkit
• Supports compatible PC chartplotter and navigation applications
• Can configure and update compatible Actisense products
• Rule-enforcing firewall between the PC and NMEA 2000 network
• Multiple diagnostic LEDs
• Low power consumption
• Rugged IP67-rated housing
• Fully NMEA 2000 certified

Technical Specifications

Typical Applications

• Connecting an NMEA 2000 network to a Windows computer
• Using compatible PC chartplotter and navigation software
• Viewing vessel data through Actisense NMEA Reader
• Diagnosing NMEA 2000 network problems
• Recording and analysing NMEA network data
• Configuring compatible Actisense products
• Performing firmware updates on supported Actisense devices
• Transferring compatible position, wind, depth, heading, engine and AIS data to PC applications

Important Information

The NGX-1-USB is designed primarily for connection to a Windows PC through its integrated USB cable. It does not provide a bare-wire NMEA 0183 connection. For direct connection to NMEA 0183, RS232 or RS422 equipment, select the NGX-1-ISO version.

The NGX-1-USB does not provide Wi-Fi connectivity. Although the hardware may contain a wireless module, Wi-Fi is disabled on this model.

A correctly powered and terminated NMEA 2000 network is required. Application compatibility and available data conversions depend on the software and data formats being used.