Accessories for Marine Electronics

The Garmin 8-Pin to Dual 4-Pin Transducer Adapter Cable allows compatible Garmin marine electronics to connect to transducers using dual 4-pin connections. Designed for use with compatible Garmin...

Install your chartplotter in a tight-fitting location with the Garmin 12-Pin Transducer Right Angle Adapter Cable. Its angled connector provides greater flexibility where space behind the display is...

Keep your chart cards within easy reach with the Garmin USB Card Reader. This compact, water-resistant reader provides two full-size SD card slots for accessing compatible charts, software updates...

Keep an eye on important areas of your boat with the Garmin GC 200 marine IP camera. It delivers live video to a compatible Garmin chartplotter, making it useful for monitoring the cockpit, aft deck,...

Power and connect your compatible Garmin GPSMAP chart plotter with this genuine Garmin replacement power cable. The cable features a secure 2-pin connection and measures approximately 6 ft (1.8 m),...

The Garmin Deck Mount Stabilizer Kit supports the Force Kraken trolling motor while it is in the stowed position. By supporting the motor shaft against the boat deck, the stabilizer helps reduce...

Mount three Garmin GNX™ 120 marine instrument displays on your mast with this purpose-built carbon fiber mast bracket. Designed to create a sleek, integrated “glass mast” appearance, the bracket...

The Antisense A2K-4WD-1 NMEA 2000 4-Way Instrument Drop provides a compact and efficient way to connect up to four NMEA 2000 devices located in the same area. A conventional installation would...

Simrad MO16, MO19, and MO24 marine monitors (including touch models like MO16-T), this kit provides the essential power and serial connectors/plugs needed for secure, reliable connections in...

The Icom rapid desktop charger charges the BP-245N battery (suits M71 and M73) in 2.5 hours. Features Rapid charger Built-in protection by CPU control LED status display Specifications Charging...

Perfectly designed for mounting in a cockpit pedestal, by the chart table or in other locations suiting a ‘portrait’ orient

Use our cover to protect your compatible 9" STRIKER device from the harsh marine environment when not in use.

Adaptor cable to retrofit a HALO Dome Radar to a 3G/4G installation. Fits into the cable void under the dome and allows you to use your 3G/4G. Broadband Radar cable for a HALO Dome Radar installation.

Use the Garmin sun cover to protect your ECHOMAP UHD2 55cv from the harsh marine environment when not in use.

Get an extra 15 meters (49.21 feet) of length when using this cable with your GC 12 or GC 14 camera. This cable has male connectors on both ends.

See more aboard your vessel Provides an extra set of eyes aboard your vessel to monitor areas above or below decks Analog camera delivers excellent quality images, even in low light; perfect for...

Icom M423 Power, Volume Knob replacement. Features 1 button per pack Suits the Icom M423 models of DSC Radio

Description The Icom M411 VHF Flush Mount Kit is a simple way of installing a flush mounted VHF into your dash panel. Also fits the M421 Icom Radio. Features Suits Icom VHF: IC-M411, IC-M421 Made...

Icom M423 VHF Flush Mount Kit S/S MB132.001. Features Stainless steel Suits Icom m423 and m323 radios

The Garmin SD Card Reader (Part #010-1077700) is a marine accessory designed for convenient data management on older Garmin chartplotters and multifunction displays (such as the GPSMAP...

The Garmin NiMH Battery for gWind Wireless (010-12117-10) is a genuine Garmin replacement battery designed specifically for the gWind Wireless wind transducer system. In marine environments like...

Surface mount your compatible GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing. FAQs 1. Is the Garmin bail mount good for surface mounting? Yes, as it was made for surface...

Combine a Garmin transom mount scanning transducer with a Garmin in-hull mounted transducer (GT15-IH) . Use this Y-cable to connect a 12-pin SideVü/Clearvü-only transducer along with an 8-pin...

The Garmin Power/Data/Sonar Cable (19-pin) is a high-quality connection cable designed to provide reliable power, data transfer, and sonar functionality for compatible Garmin marine devices...

Garmin offers a range of power/data cables designed to ensure seamless connectivity and reliable power supply for your marine electronics. These cables are essential for powering Garmin devices such...

Use this adapter cable to connect an 8-pin transducer to a 12-pin sonar port on a compatible marine device.

The Garmin Protective Cover for echoMAP 5Xdv Series is designed to shield your compatible Garmin display from the harsh marine environment when not in use. Made from durable, high-quality materials,...

Our protective cover fits your compatible STRIKER, helping to keep it safe from the harsh marine environment when not in use.

The Garmin GST 10 is an NMEA 2000 analog adapter that converts traditional analog water-speed and water-temperature sensor data into digital signals, enabling integration with modern Garmin...

Connect a 4-pin transducer to a 12-pin sonar port on your compatible marine device with this adapter cable.

The Garmin GND 10 Black Box Bridge connects Nexus instruments and sensors to an NMEA 2000 network. It converts supported data between the two networks, helping you integrate existing Nexus equipment...

The easy-to-use GRID 20 remote input device provides intuitive remote access and control of your entire Garmin marine system. It features a 360-degree joystick with a rotary knob and push-to-select...

The Garmin BlueNet 30 gateway is required for Garmin BlueNet™ network-compatible devices to network with legacy Garmin marine devices. Through this gateway, you can connect a Garmin Blue Net network...

Save space on your helm with the compact, water-resistant SD™ card reader. It holds two full-size SD cards for quick access to charts, software updates and ActiveCaptain® data. Featuring a 2”x 2”...

The Scanstrut Rail Pod provides a sleek and practical solution for mounting your MFD onto any standard or curved rail. Featuring waterproof internal cable routing, it allows cables to pass seamlessly...

Protect your Eagle 9 display from the harsh marine environment with this quality suncover from Lowrance   Features Co

Protect your Eagle 7 display from the harsh marine environment with this quality suncover from Lowrance

Protect your Eagle 5 display from the harsh marine environment with this quality suncover from Lowrance. Features Protects the marine environment Suncover for Eagle Displays

Protect your Eagle 4x display from the harsh marine environment with this quality suncover from Lowrance   Features Protects the marine environment Manufacturer advis

Garmin BlueNet network cable is used to connect a Garmin BlueNet 20 switch. Garmin BlueNet 30 gateways to each other, or other Garmin BlueNet network products.