null
Ireland EU online store
Garmin

Garmin Boat Switch

SKU:
G010-02735-00
UPC:
753759293147
  • Garmin Boat Switch_1
  • Garmin Boat Switch_2
  • Garmin Boat Switch_3
  • Garmin Boat Switch_4
$1,166.28

Awaiting stock!

Description

Quality Switching Simple Installation

Get the integrated-boat experience with digital switching that allows you to operate onboard electrical functions right from your GPSMAP® or ECHOMAP™ chartplotter. Full NMEA 2000 connectivity to connect to your systems

Features

  • Reduce reliance on traditional switches and fuses. Add digital control and software current monitoring.
  • Operate lights, pumps, the horn, and more. Just tap your compatible chartplotter.
  • Fill up or empty out? See levels in four tanks — such as fuel, freshwater, greywater, blackwater, and livewell
  • See system status. Monitor battery voltage, bilge pump operation, and more.
  • Set it up your way. Position and name switches with the easy-to-use interface.
  • Retrofit into your boat. It requires no special tools or configuration.

Specifications 

  • Dimensions (WxHxD) (unit only): 9.1″ x 4.2″ x 1.5″ (230 x 106 x 38 mm)
  • Weight (unit only): 14.1 oz (400 g)
  • Ambient temperature:- 20 °C to +55° C
  • Enclosure water rating IP65
  • CommunicationCAN-bus NMEA 2000® network, LEN-0
  • High side13 ch 10A, 7 ch 5A
  • Ground contact switch input 15
  • Bilge pump monitor2
  • Volt3 @ 0-16 V +/-1%
  • Resistance2 @ 0-1500 ohm +/- 5%
  • Maximum current: 50A
  • Power-off current consumption: 60mA
  • Supply voltage: (12V)9-16VDC
  • NMEA 2000®Micro 5-pin M12 male

In The Box

  • Garmin Boat Switch
  • Garmin Boat Switch Harness X1
  • Garmin Boat Switch Harness X2
  • Installation instructions

Downloads

FAQs

1. Can I manage my boat's lights and pumps using the chartplotter?

Yes, lights, pumps, the horn and all other connected components may be controlled through the chartplotter.

2. Do I need to change the existing switches?

No, Garmin Boat Switch may be fitted into your boat even though you don't want to change the whole system.

3. Can I check the status of batteries and tanks on my boat?

Yes, you can check battery voltage, monitor bilge pump status and the levels in up to four tanks at once.

4. Do I need specific tools to install it?

No, no tools are needed in order to install it into your boat since it was made specifically for retrofitting.

5. Is it going to work with my Garmin chartplotter?

Yes, it works with Garmin GPSMAP and ECHOMAP chartplotters via the NMEA 2000 network.

View AllClose

Videos Hide Videos Show Videos