null
Ireland EU online store
International

International Cruiser 200 Antifoul - 375ML

€28.95

Description

International Cruiser 200 is a quality polishing antifouling that provides comprehensive protection for all substrates, including aluminium. Available in Bright White making it ideal for waterline boot topping

Features

  • Protects any surface, including aluminium
  • Bright White colour for a great appearance
  • Easy application enables quick repairs
  • Suitable for waterline strip

Specification

  • Brand: International
  • Capacity: 375ML
  • Area: Below the Waterline
  • Suitable for: Hull
  • Finish/Sheen: Matt
  • Type of Antifouling: Ablative
  • Suitable Water Types: Sea Water, Fresh Water, Brackish Water
  • Substrates: Aluminium / Zinc-Galvanised Steel, Cast Iron, GRP/FRP, Lead, Steel, Wood, Bronze/Stainless Steel
  • Application Method: Brush, Roller
  • Recommended Number of Coats: 2 - 3
  • Typical Shelf Life: 2 Years

Colours Avaliablity

  • White
  • Red
  • Black

Preparation 

PREVIOUSLY PAINTED SURFACE

  • In Good Condition: All fouling and contamination must be thoroughly removed including the leached layer. Use high pressure fresh water wash (3000 psi/207 bar) and/or scraping and wet sanding with typically 80­120 grade paper. Do not dry sand. If old antifouling is incompatible or unknown, seal with suitable International Paint barrier/sealer coat.
  • In Poor Condition: Use Interstrip to remove all traces of antifouling.

PRIMING: All preparation for bare substrates is covered on the appropriate primer datasheet.

BARE GRP: Prime with Gelshield 200 for osmosis protection, or Primocon or Interprotect.

STEEL/IRON/LEAD/WOOD: Prime with Interprotect or Primocon.

PLYWOOD: Prime with Epiglass followed by Interprotect.

Hints

  • Mixing: Thoroughly stir until product is mixed to a uniform consistency before use.
  • Thinning: Thinning is not recommended. Antifouling performance can be compromised if correct dry film thickness is not applied.
  • Cleaner: YTA085 International Antifouling Thinner #3.
  • Ventilation and Humidity Control: Ensure adequate ventilation during use.
  • Other: Antifoulings should only be wet sanded. Never dry sand or burn­off old antifouling. True colour will develop after immersion

Hazard Warnings

Hazard Pictogram :
Signal Word: Danger
Hazard Statements:

Flammable liquid and vapour
Causes serious eye damage
May cause an allergic skin reaction
Very toxic to aquatic life with long lasting effects

Precautionary Statement: General:

Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand.

Prevention:

Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid release to the environment.

Response:

IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF ON SKIN: Take off contaminated clothing and wash it before reuse. IF IN EYES: Immediately call a POISON CENTER or physician.

Storage:

Keep cool.

Disposal:

Dispose of contents and container in accordance with all local, regional, national and international regulations.

Hazardous Ingredients

All White: Dicopper Oxide, Rosin, Fatty Acids, C18-unsatd, Trimers, Compds. with Oleylamine, Fatty Acids, Tall-oil, compds. with Oleylamine.

Supplemental Label Elements

Wear appropriate respirator when ventilation is inadequate

Technical Files

Technical Data Sheet

Safety datasheet (PDF 188KB)

 

 

View AllClose