The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

International Micron 350 Antifoul

Write a Review
$66.83 - $209.68

Description

Please note: Delivery of International paint products within Ireland only.

Sick of antifouling your boat every season? Use the International Micron 350 Antifoul to protect your boat for more than one season. It provides protection from scum and growth that would otherwise grow on your hull.

International Micron 350 is a premium antifouling, offering outstanding 2-year protection in all conditions. A new formulation ensures truer colours, while Self-Polishing Copolymer technology delivers consistent performance. Use the International Micron 350 Antifoul for boats with heavy build up or if you dont want to re-antifoul the boat every year.

International Micron 350 is an antifouling product effective against fouling organisms; slime, aquatic plants and animals. A Premium Self Polishing Copolymer (SPC) antifouling suitable for professional and consumer application onto vessels in fresh and salt water. The continuously polishing system provides up to 2 years performance, avoiding paint build up. The ever­smoothing surface ensures that drag is always
minimised whilst maintaining optimum biocide release including in stationary periods. Can be applied up to 12 months before launch.

Antifoul Primer: International Primocon
- Antifoul your boat for 2 seasons in one go!
- Not suitable for high speed craft 
- Finish Matt
- Coverage: 7.5m SQ per 750ml can
- Self-polishes for consistent protection even while stationary
- Outstanding performance in all conditions
- Quick-drying, easy to apply and extremely durable
- Size: 750ml
- Replaces old International Micron Optima and Ultra 2 antifouls

Preparation:

In Good Condition: All fouling and contamination must be thoroughly removed including the leached layer. Use high pressure fresh water wash (3000 psi/207 bar) and/or scraping and wet sanding with typically 80­120 grade paper. Do not dry sand. If old antifouling is incompatible or unknown, seal with suitable International Paint barrier/sealer coat.
In Poor Condition: Use Interstrip to remove all traces of antifouling.
Priming: All preparation for bare substrates is covered on the appropriate primer datasheet.
Bare GRP: Prime with Gelshield 200 for osmosis protection, or Primocon or Interprotect. 
Steel/Iron/Lead/Wood: Prime with Interprotect or Primocon.
Thinning is not recommended. Antifouling performance can be compromised if correct dry film thickness is not applied.

View AllClose