Boom and Mast

Fully rigged Bahia mast complete with all fittings, halyards, standing rigging wires, and spreaders. Please note that the Shipping Restriction map applies to this product due to its length Specifications Weight: 6 kg Dimensions: 680 × 20 ×...

Laser Bahia / Vago mast jib sheave box with nylon pulley 90623 - (Selden 505-071-01 )

Laser Performance Bahia Mast Shroud - Single Features Single shroud wire only Use a retaining bung to lock the shroud

The Laser Gnav Strut suits the Laser Bahia and Vago sailboats and is constructed from aluminium tube with end fittings. It connects the mast hinge fitting to the boom slider below using two clevis pins (sold separately). Specifications Weight: 0.008...

Gnav slider runs on top of boom, connects to the gnav strut and carry's out the same function as a kicker or vang ( Selden 511-805-01)

Plastic replacement Bhaia mast heel. This part is also known as the 'Laser Bahia Mast Foot', not to be confused with the Laser Bahia Mast Step.

The Laser Bahia Mast Step holds the mast when it is positioned upright. Bahia mast step aluminium construction, riveted to the cross beam, used to pin the mast foot to the cross beam.

RS Bahia Gennaker Pole (Formerly Laser Bahia) -Genuine Bahia Parts Specifications Weight: 1 kg Dimension: 120 × 5 × 4 cm

The replacement sheave to suit the mast head on all Laser and Bahia sailing boats. The Laser Sheave is made from nylon plastic and fits onto the top of the mast with a clevis pin 3/16" x 1" (sold separately). Specification Material: Nylon plastic

Auto Ratchet block 45 mm for the Laser Vago and Bahia sailboats. Ratchet blocks can come in manual or automatic versions. The manual requires a switch to turn the ratchet on and off. The auto ratchet blocks let the line run freely until it's put under...

The Laser Drop Nose Pin is used for the Picos, Vagos and Bahias - Suits the Mast Gate Claw Pin for the Laser Pico and the gooseneck connection for the Laser Vago/Bahia Mast.