null
Ireland EU online store

Laser Deck Fittings: Cleats, Bungs & Bailers

Laser Deck Fittings: Cleats, Bungs & Bailers

  • ILCA Laser Centreboard Stop Set 85236

    ILCA Laser Centreboard ( Daggerboard) Stop Set by Holt

    ILCA

    RUB1,294.95
    ILCA Laser Centreboard Stop Set by Holt How to assemble Allign the first cap fitting to the centre shaft and push down hard to until the shaft is flush with outer side of cap  Fit the part assembled unit to the centreboard and then align and...
    HT70201
    RUB1,294.95
  • Holt Aluminium Fairlead Deck & Boom (Pair)

    Holt Aluminium Fairlead Deck & Boom (Pair)

    Holt

    RUB2,494.90
    Specifications Aluminium Hard anodised Inside diameter: 6mm Fixing hole size: 4mm Fixing spacing: 23mm Weight: 12g
    HT.282ALU
    RUB2,494.90
  • LCA Laser Harken XD Deck Plate with Harken Air Blocks

    ILCA Laser Harken XD Deck Plate with Harken Air Blocks

    ILCA

    RUB7,594.68
    The ILCA Laser XD Stainless Steel Block Plate is deck mounted to guide the Downhaul and Outhaul Control lines towards the Harken Deck Jam Cleat . The plate is mounted directly aft of the mast slot and includes 2 x Laser XD Harken 16 mm Air...
    ILC5920
    RUB7,594.68
  • Laser Traveller Fair Lead Grommets

    Laser Traveller Fair Lead Grommets

    Laser

    RUB594.98
    Self-tapping grommets for Laser traveller fair leads. This items is placed under the deck to receive the screws from the traveler fairlead - It serves to hide the exposed screw but also add strength to the fitting
    LS-91309
    RUB594.98
  • ILCA Laser Stainless Hiking Eye Strap 32mm

    ILCA Laser Stainless Eyestrap 32mm

    ILCA

    RUB394.98
    Heavy grade Eye Strap with 32mm Hole Centres  - Used for hiking strap, stern bulkhead attachment on Laser
    ILC5942
    RUB394.98
  • Laser Cockpit Drain Plug Bushing Assembly 91284

    Laser Cockpit Drain Plug Bushing Assembly 91284

    Laser

    RUB3,994.83
    Laser Cockpit Drain 92184 - This Laser Drain Bush Set sits at the rear of the cockpit and creates the opening for the self-bailer control rod to operate through. When replacing this item, be sure to bed it with Sikaflex 291    
    LS-91284
    RUB3,994.83
  • Rooster Pro Plus Padded Laser Toestrap Rooster Pro Plus Padded Laser Toestrap

    Rooster Pro Plus Padded Laser Toestrap

    Rooster

    RUB4,894.79
    Rooster toestraps use a unique rubber compound that has a very high coefficient of friction, whilst also being light and durable. Our new Pro Plus Range has this rubber added to the bottom of our padded toestrap.  Rooster Pro Plus Padded straps are...
    ROOSTER-104145
    RUB4,894.79
  • Optiparts Cam Cleat - Aluminium - 38mm

    Optiparts Cam Cleat - Aluminium - 38mm

    Optiparts

    RUB3,794.84
    The aluminium ball bearing Laser cam cleat is features hard anodized and PTFE coated ball bearing cams. Aluminium cams for Laser sailling wear significantly less than carbon composite (plastic) cams. Specifications Material: Aluminium Fixing screw: 5 mm...
    OPEX2182
    RUB3,794.84
  • ILCA LaserRudder Retaining Clip ILC5954

    ILCA / Laser Rudder Retaining Clip

    ILCA

    RUB494.98
    The ILCA Laser rudder retaining clip prevents the rudder popping up and becoming detached. The rudder clip is easy to fit but remember to use Sikaflex or similiar sealant to keep the hull watertight.
    ILC5954
    RUB494.98
  • Laser Performance Pico Hiking Strap Plate - Blue

    Laser Performance Pico Hiking Strap Plate - Blue

    Laser

    RUB194.99
    The Pico Toe Strap plate is used to spread the load when attaching toe strap or MK1/MK2 Laser friction pad. Specification Material: Plastic Colour: Blue
    LS-91130
    RUB194.99
  • Holt Laser Grab Rail - Boxed Version

    Holt Laser Grab Rail - HT7038 Boxed Version

    Laser

    RUB3,894.84
    Holt Laser Grab Rail fit all Laser Performance and ILCA Dinghies  - Two required per boat - It is recommended to use a sealant, such as Sikaflex 291i to bed screws  Accessories Sikaflex 291i Sealant - Click here  
    HT70381
    RUB3,894.84