Laser Deck Fittings: Cleats, Bungs & Bailers

The Sowester Screw-in Bung fits the Laser Standard and Topper Standard boats. It comes with a retaining piece and washer seal to stop any leaks. Features   Designed to fit existing Topper and Laser...

The Laser Pico Mainsheet Padeye 91303 is the official stainless-steel deck fitting designed specifically for Laser Pico dinghies. Precision-engineered for durability and strength, this genuine Laser...

Laser XD Deck Plate Stainless Steel Features Deck plate to attach the outhaul and Cunningham blocks Stainless steel

Grabrails for ILCS and Laser Sailboats - Colour Grey - Suits all Rigs

The Holt L1 Friction Pad is a replacement component designed for dinghy daggerboards—specifically for the driver‐type “Laser” foiling or standard Laser hulls where the board retention uses a friction...

The Holt Brass Drain Bush Set (HT7035) is a premium accessory crafted for sailboat mast, boom, and deck drainage systems. Designed to replace worn or corroded bushes, this set ensures smooth...

The Holt Self Bailer S/S HA 4555B is a premium one-way drainage valve designed to automatically eject water from a hull once the craft is moving, while preventing ingress when stationary. Crafted...

ILCA Laser Centreboard Stop Set by Holt How to assemble Align the first cap fitting to the centre shaft and push down hard to until the shaft is flush with outer side of cap  Fit the part assembled...

ILCA deck-mounted fairlead for traveller system. Fits ILCA 7,6 & 4 and Laser standard, radial & 4.7. The advantage of the Laser aluminium traveler fairlead is that it doesn't break like the plastic...

Holt Laser Replacement Aluminium Fairlead Boom & Deck (Pair) : HT.282ALU Holt arts are high quality replacements that perform the same function as the original part. They should not be confused with...

RWO R2067 screw-in black drain bung, suit fitting R2066 - Popular fit to many dinghies, including Laser and ILCA Dimensions Aperture: 17mm Weight: 5 g  

The ILCA Laser XD Stainless Steel Block Plate is deck mounted to guide the Downhaul and Outhaul Control lines towards the Harken Deck Jam Cleat. The plate is mounted directly aft of the mast slot and...

Nautos Autobailer to suit all model Laser and ILCA sailing dinghies, comes as a complete swop-out assembly with fixing screw Features Slide down chute with 'O rings' Screw and plastic insert...

ILCA Laser Painter Line in yellow flecked, floating polypropylene line - 8mm x 8m Braid - Satisfies the requirement to carry a tow line in ILCA Class Events.

RWO screw-in black drain bung and socket - Suits Laser and many other sailing dinghies. Specifications Fixing center distance (mm): 36 Fixing (mm): 4.0 Weight (g): 11 Cutting (mm): 22...

Heavy grade Eye Strap with 32mm Hole Centres - Used for hiking strap, stern bulkhead attachment on ILCA Laser.

Laser Cockpit Drain 92184 - This Laser Drain Bush Set sits at the rear of the cockpit and creates the opening for the self-bailer control rod to operate through. When replacing this item, be sure to...

Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment...

These bailer spring plates are manufactured using the highest quality spring stainless steel, designed to both retract using spring tension, and at the same time providing a surface for the activator...

Rooster toestraps use a unique rubber compound that has a very high coefficient of friction, whilst also being light and durable. Our new Pro Plus Range has this rubber added to the bottom of our...

Optiparts Drain Plug for Laser.

The aluminium ball bearing Laser cam cleat is features hard anodized and PTFE coated ball bearing cams. Aluminium cams for Laser sailling wear significantly less than carbon composite (plastic) cams...

The ILCA Laser rudder retaining clip prevents the rudder popping up and becoming detached. The rudder clip is easy to fit but remember to use Sikaflex or similar sealant to keep the hull watertight...

The Pico Toe Strap plate is used to spread the load when attaching toe strap or MK1/MK2 Laser friction pad. Specifications Material: Plastic Colour: Blue

Laser Toe Strap Padded in grey with XD logo. Internal plastic stiffener stops the Laser Toe Strap from turning over, heat sealed screw holes for easy fit. Features XD toe strap for maximum grip and...

The ILCA Laser Grab Rail Grommets are for attaching the Laser Grab Rail. The Grab Rail requires five per side. Grommets are supplied in a pack of ten which will complete one ILCA Laser Hull. Remember...

Holt Laser Grab Rail fits all Laser Performance and ILCA Dinghies - Two required per boat - It is recommended to use a sealant, such as Sikaflex 291i, to bed screws  Accessories Sikaflex 291i Sealant...

Official ILCA approved Nautos self-bailer ( Autobailer) - Suits all models ILCA and Laser. Complete autobailer assembly for the ILCA dinghy with bailer plate, chute door, bung, and screw. This is a...

Standard  Bow eye fairlead for all Laser and ILCA rig sail boats   Acetal open-based and bullseye rope fairleads with or without stainless steel liner. Features Fixing Hole Size: 5mm Dist...

Aluminium deck cleat is designed to hold 12mm to 16mm rope under high pressure. Specifications Material: Aluminium Rope diameter: 1/2 - 5/8" (12 mm - 16 mm) Hole diameter: 3 3/4" (95 mm) Length: 4...

The Laser Harken Cammetrick cleat is similar to the Laser Cleat 91517, but this one is made of plastic. Harken Micro Cam Cleats hold lines securely and release instantly for easy, precise trimming...

ILCA Laser Centreboard or Daggerboard Stops - These push-together sets prevent the Daggerboard dropping too low. How to assemble Align the first cap fitting to the centre shaft and push down hard to...

The MK1 flat back rubber friction pad for the deck of any Laser dinghy designed as a friction plate to keep the Laser daggerboard in place during sailing.

The ILCA Laser XD Stainless Steel Block Plate is deck mounted to guide the Downhaul and Outhaul Control lines towards the Harken Deck Jam Cleat. The plate is mounted directly aft of the mast slot and...

ILCA Harken XD Outhaul & Downhaul Deck Cleat with Harken Double Jammer. Suits all models ILCA & Laser - Official branded ILCA product. Fasteners 2x A4 Stainless 10 x 1 1/2" self tappers Use sealant...

A replacement bung for your Laser Self Bailer. Very easy to fit and recommended to have a spare Bailer Bung with your sailing kit. Laser® is a registered trademark owned by Velum Limited and...

RWO deck mounted, traveller fairlead with stainless steel insert. Suits ILCA 4,6 & 7 and Laser 4.7, Radial & Standard. Features 10mm Aperture Hole centres 23mm Height 18mm High load bearing, acetal...