Laser

The 8" road wheel fits the Laser, Pico, Vago, Bahia and Funboat road bases. A must if you are doing a lot of towing. Specification Diameter: 8"

ILCA 7 Mk11 Batten Set, approved by ILCA for all class events. ILCA 7 Batten set complete with all 3 battens and end caps. This set is suitable for the MK2 sails.

Laser batten tips that will replace the old style tips. This pack will able you to replace the ends of all 3 battens.

Irish national flag for use with ILCA Laser Sails requiring sail identification. Specification Size: 567 mm x 337 mm Rules If required by the Notice of Race and the Sailing Instructions, a...

The Laser Red Rhombus is for the identification of ladies when racing in mixed fleets. Sails used in the women’s events shall carry a red rhombus above the top batten pocket on both sides...

ILCA Laser Black Sail Number 12" come with an adhesive backing and are used for identification in sailing events and races. Approved for ILCA 6 & ILCA 7 & Laser Radial and Full Rig...

The Laser Red Sail Number 12" come with an adhesive backing and are used for identification in sailing events and races. The 12" versions are popular for Laser 4.7,  Laser Pico and Funboat...

The Laser Black Sail Numbers 9" come with an adhesive backing and are used for identification in sailing events and races. The 9" versions are popular for Laser 4.7, Laser Pico and Funboat. We can...

The Laser Red Sail Numbers 9" come with an adhesive backing and are used for identification in sailing events and races. The 9" versions are popular for Laser 4.7,  Laser Pico and Funboat. We...

Stainless steel kicking strap plate for Standard, Radial, and 4.7 lower mast attached with rivets. Not inlcuded Specifications Material: Stainless steel Fasteners 4.8mm x 12.8mm Stainless Rivets

Top mast collar black plastic fixed with rivets (sold separately). Suitable for Laser 1 and Laser Pico Masts. Specifications Material: Plastic Colour: Black

ILCA Laser Boom Plug - Inboard end to fit boom to lower mast via gooseneck fitting. Use a 12mm x  Specification Material: Plastic

Fits the Laser Standard and 4.7 lower mast, plastic mast foot plug with moulded in sand grooves, change it regularly to protect your mast hole.

Laser Performance Pico/Funboat Upper Mast Base Plug black plastic fits on the bottom of the top mast, fixed with 2 x rivets (sold separately). Specifications Material: Plastic Colour: Black

Plug black plastic fits on the top of the mast, fixed with rivets x 2 (sold separately). It can also be used as a Laser Pico Top Mast Plug. Specifications Material: Plastic Colour: Black

This large blue plastic Laser Boom Fairlead has a stainless steel insert to reduce chafing and allow larger lines with heavier loads. Features Suits the topaz deck fairlead Requires 2 x screw (6...

The Pico Toe Strap plate is used to spread the load when attaching toe strap or MK1/MK2 Laser friction pad. Specifications Material: Plastic Colour: Blue

Laser Toe Strap Padded in grey with XD logo. Internal plastic stiffener stops the Laser Toe Strap from turning over, heat sealed screw holes for easy fit. Features XD toe strap for maximum grip and...

The ILCA Laser Grab Rail Grommets are for attaching the Laser Grab Rail. The Grab Rail requires five per side. Grommets are supplied in a pack of ten which will complete one ILCA Laser Hull. Remember...

Holt Laser Grab Rail fits all Laser Performance and ILCA Dinghies - Two required per boat - It is recommended to use a sealant, such as Sikaflex 291i, to bed screws  Accessories Sikaflex 291i...

Aluminium deck cleat is designed to hold 12mm to 16mm rope under high pressure. Specifications Material: Aluminium Rope diameter: 1/2 - 5/8" (12 mm - 16 mm) Hole diameter: 3 3/4" (95...

The Laser Harken Cammetrick cleat is similar to the Laser Cleat 91517, but this one is made of plastic. Harken Micro Cam Cleats hold lines securely and release instantly for easy, precise trimming...

The MK1 flat back rubber friction pad for the deck of any Laser dinghy designed as a friction plate to keep the Laser daggerboard in place during sailing.

The Laser rudder head is an aluminium construction complete with a rudder ring and tiller retaining pin. Rudder fittings are stainless steel for long-lasting use. Please make sure your rudder head...

Aluminium tiller extension complete with UJ and rubber nonslip covering. Specifications Material: Aluminium Length: 1067 mm

Older style articulated stainless steel tiller joint for smaller sailing dinghies

High quality, reliable RWO Omniflex Tiller Joint to suit most dinghy tiller extension, including ILCA Laser, Topper, and many others. This Omniflex joint is made from Elastomeric polymer which allows...

The Laser Tiller Extension is made from carbon fibre it comes with a flexible tiller joint that attaches to your main tiller. Designed for the Laser XD range of racing hardware for the any class of...

The ILCA Mega Bolt is the pivot bolt to fit the Rudder Head to the Rudders Plade - Supplied with 20mm Washers.

The Laser XD rudder head pivot bolt is an upgraded, large-diameter bolt and nylock nut with 20 mm washers. The rudder bolt will hold your rudder blade firmly in place.

Laser shock cord retainer with plastic clip keeps dagger board in place. Specifications Colour: Black Length: 7 mm

Laser Performance Daggerboard Infused.

The Laser Lower Vang Block is used for the Laser Pico and Laser Standard rig sailboats on the top section of the Vang which attaches to the eye plate on the boom.Comes with removable pin to...

Laser XD Vang Kicker Top Harken Block is plain bearing stainless steel body, kicker key is not supplied.

The Laser Curved Kicker Key fits onto the kicker/vang system and slots into the boom. Features New and stronger kicker key (thicker) Connects to the upper boom vang block Official class legal Laser...

The Laser Harken Power Pack is a complete kit and will upgrade your old Laser cunningham and outhaul. The Harken Power Pack is retrofitable to older hulls and uses existing screw holes. The Power...

Harken Race complete kit to upgrade old systems for Cunningham and outhaul retrofitable to older hulls, uses existing screw holes, supplied with all ropes, blocks, cleats, and screws, and fitting...

Pre-Spliced Laser Primary line for the Cunningham or Laser Downhaul system, which connects to the kicker at one end, is rigged through the sail, and connected to a becket block at the other end...

Laser Primary Control Line in Marlow Excel D12 Dyneema SK78. Features High strength 12 Strand Easy to splice Low water absorption Superb low stretch for precision control Specifications Material:...

Laser Primary Control Line in Marlow Excel D12 Dyneema SK78. Features High strength 12 Strand Easy to splice Low water absorption Superb low stretch for precision control Specifications Material:...